Frontiers in Materials

Original Research

Published on 15 Jan 2026

Research on the mechanical properties and microstructure of saline soil subgrade improved by steel slag powder and lime

in Structural Materials

Peirong Liu
Shiyu Long
Zhenping Huang
Xin Shen
Guodong Li
Jinghong Su
Jie Zhu

Frontiers in Materials

doi 10.3389/fmats.2026.1751820

776 views

Original Research

Published on 15 Jan 2026

Laboratory test and simulation for anchoring slope of steel tube foam concrete frame beam

in Structural Materials

Feng Li
Wenjing Lian
Yuzhong Hu
Tian Lan
Tingsong Xiao

Frontiers in Materials

doi 10.3389/fmats.2026.1747622

1,005 views

Original Research

Accepted on 14 Jan 2026

Mechanical Performance and Landslide Stabilization Applications of Precast Small-Diameter Prestressed Concrete Pipe Piles

in Structural Materials

Ming Wu
Yao Liang
Xiaobo Tang

Frontiers in Materials

142 views

Original Research

Accepted on 14 Jan 2026

Effect of heat treatment on very-high-cycle fatigue performance of EA4T axle steel

in Structural Materials

Chun GAO
Qingye QIU
Dongqin ZHANG
Shisen LIU

Frontiers in Materials

207 views

Original Research

Published on 14 Jan 2026

Study on the physical properties, anti-aging properties, and rheological characteristics of graphene oxide/rubber powder composite modified asphalt

in Smart Materials

Youtao Wang
Yongzhen Sun
Lujie Huang
Xiaofeng Wang
Chanyuan Lin

Frontiers in Materials

doi 10.3389/fmats.2025.1758696

744 views

Review

Published on 12 Jan 2026

Composite materials based on metal-organic frameworks loaded with effective therapeutic components for promoting wound healing

in Biomaterials and Bio-Inspired Materials

Shaogeng Wang
Fuchao Huang
Junbo Wang
Xiaomin Wu
Xiaohua Pan

Frontiers in Materials

doi 10.3389/fmats.2025.1713264

1,160 views

Original Research

Published on 09 Jan 2026

A strategy for fabricating a multifunctional hydrogel with enhanced adhesion and ROS-scavenging capabilities

in Biomaterials and Bio-Inspired Materials

Yijie Pi
Tianwei Yu
Wen Yao
JingJing Xu
YangYang Peng
Chiwen Cheng
Yanqing Li
Jiale Li
Di Wu
Yifeng Yu

Frontiers in Materials

doi 10.3389/fmats.2025.1698044

882 views

Original Research

Published on 08 Jan 2026

Rapid non-contact detection of aggregate gradation based on stereo vision

in Computational Materials Science

Yanzhen Li
Bo Zang
Zhiyong Huang
Jiaming Tang

Frontiers in Materials

doi 10.3389/fmats.2025.1745325

729 views

Original Research

Published on 08 Jan 2026

Insights into the influence of waste ceramic tiles powder on cement hydration and microstructure from electrochemical impedance spectroscopy

in Structural Materials

Shudong Wang
Qiang Huang
Yu Feng
Lipeng Wu

Frontiers in Materials

doi 10.3389/fmats.2025.1747505

858 views

Original Research

Published on 08 Jan 2026

Study on the development height of “two zones” under repeated mining of medium-thick coal seams at close range

in Mechanics of Materials

Dong Zhou
Yaowen Wu
Lingcheng Kong
Zhongming Liu
Hongjun Yan
Ming Yang

Frontiers in Materials

doi 10.3389/fmats.2025.1704755

746 views

Editorial

Published on 07 Jan 2026

Editorial: Advancements in creep-resistant alloys for high-performance applications

in Environmental Degradation of Materials

Petr Dymáček
Jiří Svoboda
Gerald Ressel
Shin-Ichi Komazaki

Frontiers in Materials

doi 10.3389/fmats.2025.1769156

936 views

Perspective

Published on 07 Jan 2026

Structural materials in Frontiers in Materials, 10 years on

in Structural Materials

John L. Provis

Frontiers in Materials

doi 10.3389/fmats.2025.1713993

1,329 views

Original Research

Published on 07 Jan 2026

Deformation prediction analysis of sandstone coal mine goaf based on discrete element method and probability integration method

in Structural Materials

Gao Ruonan
Chen Xi
Wang Yuchen
Liu Gen
Li Jin

Frontiers in Materials

doi 10.3389/fmats.2025.1747266

792 views

Correction

Published on 07 Jan 2026

Correction: Application of modified sodium alginate hydrogel for interventional embolization of hemorrhagic diseases

in Biomaterials and Bio-Inspired Materials

Shengchao Wei
Tang Deng
Caixia Wu
Jianshan Shi
Yong Liao
Lin Huang
Yongjie Liu
Shijie Zhong
Xueying Ji
Guiyun Jin

Frontiers in Materials

doi 10.3389/fmats.2025.1756535

548 views

Review

Published on 07 Jan 2026

Preventing peri-implantitis: strategies, mechanisms, and clinical perspectives for inhibiting biofilm formation on implant surface

in Biomaterials and Bio-Inspired Materials

Ziqian Zhou
Chunning Gu
Li Guo
Anyuan Shi
Junyan Jing
Wei Cheng

Frontiers in Materials

doi 10.3389/fmats.2025.1739290

1,146 views

Original Research

Published on 07 Jan 2026

Effects of salt-induced degradation on the moisture stability and high-temperature performance of PPA/BF/SBS composite modified asphalt mixture

in Smart Materials

Kaike Huang
Jian Wei
Xiaodan Liang
Huangfeng Nong
Yaoliang Xu
Linheng Huang

Frontiers in Materials

doi 10.3389/fmats.2025.1748571

846 views

Original Research

Published on 07 Jan 2026

Physics-informed neural network–transformer for dual-objective prediction and mix optimization of backfill materials

in Computational Materials Science

Huizhen Liang
Yueying Zhang
Chengmi Xiang
Shanshan Fei
Han Wei
Bei Han
Aijun Zhang

Frontiers in Materials

doi 10.3389/fmats.2025.1737888

862 views

Original Research

Published on 07 Jan 2026

Inertia friction welding of large steel piston with 480 mm diameter used in heavy-duty diesel engine components

in Structural Materials

Yanquan Wu
Feng Qin
Chunbo Zhang
Zhiyong Wang
Rui Li
Haifeng Yang
Dali Wang
Yiqi Tong
Jun Zhou

Frontiers in Materials

doi 10.3389/fmats.2025.1753778

808 views

Original Research

Published on 07 Jan 2026

The mechanism of synergistic hydration performance improvement of the ternary composite cementitious material composed of hemihydrate phosphogypsum, blast furnace slag and quicklime

in Structural Materials

Jianqiu Li
Yulu Li
Lin Yang
Jianxin Cao

Frontiers in Materials

doi 10.3389/fmats.2025.1739893

646 views

Original Research

Published on 06 Jan 2026

Experimental study on bond failure characteristics of ribbed CFRP bars embedded in ultra-high-performance concrete

in Structural Materials

Jian Zhang
Chengjun Yang
Zhicheng Ai
Zhi Zhang
Lu Ke
Xiaoyuan Wu

Frontiers in Materials

doi 10.3389/fmats.2025.1689541

835 views

Review

Published on 06 Jan 2026

Data-driven AI approaches for screening high-efficiency, stable, and lead-free perovskite photovoltaic materials: a review

in Computational Materials Science

Beibei Wang
Juan Wang
Liping Li
Dengwu Wang

Frontiers in Materials

doi 10.3389/fmats.2025.1669229

1,052 views

Original Research

Published on 05 Jan 2026

Chairside finishing and polishing of modern dental ceramics: material-specific variations in surface roughness

in Ceramics and Glass

Mohammed Alrabiah
Abdulaziz Binrayes
Hussain D. Alsayed
Riyadh I. Althumairy
Syed Rashid Habib

Frontiers in Materials

doi 10.3389/fmats.2025.1744731

803 views

Mini Review

Published on 05 Jan 2026

Mechanically stimulated self-powered electrochemical sensors: principles, classifications, and future directions

in Energy Materials

Jiseung Kang
Dae-Yong Um
Sanghyun Lee
Seonghyeon Kim

Frontiers in Materials

doi 10.3389/fmats.2025.1727201

814 views

Original Research

Accepted on 02 Jan 2026

Damage Evolution Mechanism of FRP-Constrained RC Columns Under Coupled Wind-Sand-Freeze-Thaw Erosion

in Polymeric and Composite Materials

Wenhao Ren
Siha A

Frontiers in Materials

184 views

3,862 articles

articles

Research on the mechanical properties and microstructure of saline soil subgrade improved by steel slag powder and lime

Laboratory test and simulation for anchoring slope of steel tube foam concrete frame beam

Mechanical Performance and Landslide Stabilization Applications of Precast Small-Diameter Prestressed Concrete Pipe Piles

Effect of heat treatment on very-high-cycle fatigue performance of EA4T axle steel

Study on the physical properties, anti-aging properties, and rheological characteristics of graphene oxide/rubber powder composite modified asphalt

Composite materials based on metal-organic frameworks loaded with effective therapeutic components for promoting wound healing

A strategy for fabricating a multifunctional hydrogel with enhanced adhesion and ROS-scavenging capabilities

Rapid non-contact detection of aggregate gradation based on stereo vision

Insights into the influence of waste ceramic tiles powder on cement hydration and microstructure from electrochemical impedance spectroscopy

Study on the development height of “two zones” under repeated mining of medium-thick coal seams at close range

Editorial: Advancements in creep-resistant alloys for high-performance applications

Structural materials in Frontiers in Materials, 10 years on

Deformation prediction analysis of sandstone coal mine goaf based on discrete element method and probability integration method

Correction: Application of modified sodium alginate hydrogel for interventional embolization of hemorrhagic diseases

Preventing peri-implantitis: strategies, mechanisms, and clinical perspectives for inhibiting biofilm formation on implant surface

Effects of salt-induced degradation on the moisture stability and high-temperature performance of PPA/BF/SBS composite modified asphalt mixture

Physics-informed neural network–transformer for dual-objective prediction and mix optimization of backfill materials

Inertia friction welding of large steel piston with 480 mm diameter used in heavy-duty diesel engine components

The mechanism of synergistic hydration performance improvement of the ternary composite cementitious material composed of hemihydrate phosphogypsum, blast furnace slag and quicklime

Experimental study on bond failure characteristics of ribbed CFRP bars embedded in ultra-high-performance concrete

Data-driven AI approaches for screening high-efficiency, stable, and lead-free perovskite photovoltaic materials: a review

Chairside finishing and polishing of modern dental ceramics: material-specific variations in surface roughness

Mechanically stimulated self-powered electrochemical sensors: principles, classifications, and future directions

Damage Evolution Mechanism of FRP-Constrained RC Columns Under Coupled Wind-Sand-Freeze-Thaw Erosion