Original Research
Published on 29 Jul 2026
Data-driven prediction and engineering validation of early-age autogenous shrinkage in UHPC
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2026.1867691
- 193 views
Type at least 3 characters
1,070 articles
articles
Original Research
Accepted on 27 Jul 2026
Material Design and Structural Optimization of a High-RAP Large-Size Recycled Asphalt-Stabilized Macadam Mixture
in Structural Materials
Frontiers in Materials
Original Research
Published on 24 Jul 2026
Study on mechanical response of subgrade soil based on composite micro-expansive piles material
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2026.1886423
- 376 views
Review
Accepted on 23 Jul 2026
Metal Additive Manufacturing for Unmanned Aerial Vehicle Propulsion: A Narrative Review of Recent Advances in Gas Turbine Systems
in Structural Materials
Frontiers in Materials
- 142 views
Original Research
Accepted on 22 Jul 2026
Enhancement of Mechanical Properties of SLM-Fabricated GH3625 Alloy by Direct Microscale Laser Shock Peening without Coating
in Structural Materials
Frontiers in Materials
- 135 views
Original Research
Published on 22 Jul 2026
Printability and mix design optimization of microencapsulated phase-change concrete for 3D printing
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2026.1879511
- 537 views
Original Research
Accepted on 21 Jul 2026
Influence of Hot-Mixed RAP Gradation on the Design and Performance of High-RAP Plant-Recycled Asphalt Mixtures
in Structural Materials
Frontiers in Materials
- 104 views
Original Research
Accepted on 20 Jul 2026
Study on the Cooperative Supporting Effect of Pile-anchor-support system in Deep and Large Foundation Pit
in Structural Materials
Frontiers in Materials
- 131 views
Original Research
Published on 20 Jul 2026
Role of carbon sequestration methods in enhancing water holding capacity of dredged Yellow River sediment: biochar and CO2 utilization
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2026.1891499
- 389 views
Editorial
Published on 20 Jul 2026
Editorial: Advanced materials and technologies for sustainable development of underground resources - volume II
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2026.1919334
- 495 views
Original Research
Accepted on 17 Jul 2026
Study on temperature field and thermal stress of bridge deck pavement structure based on viscoelastic parameters
in Structural Materials
Frontiers in Materials
- 175 views
Original Research
Published on 16 Jul 2026
Durability evaluation of cement-stabilized semi-rigid base courses incorporating recycled aggregates from steel slag, coal gangue, and construction waste
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2026.1894197
- 504 views
Original Research
Accepted on 15 Jul 2026
Influences of Anticorrosive Grease Layer on the Bonding Performance of the Anchor Cable–Grout Interface
in Structural Materials
Frontiers in Materials
- 141 views
Original Research
Published on 15 Jul 2026
Failure evolution and strength modeling of H-jointed layered sandstone under compression
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2026.1904975
- 356 views
Original Research
Accepted on 14 Jul 2026
Long-Term Mechanical and Environmental Performance of Municipal Solid Waste Incineration Bottom Ash as a Partial Cement Replacement in Concrete
in Structural Materials
Frontiers in Materials
- 134 views
Original Research
Accepted on 14 Jul 2026
Mortar Composites Incorporating VO2/MWCNT Solid–Solid Nanophase Change Material for Passive Indoor Temperature Regulation
in Structural Materials
Frontiers in Materials
- 127 views
Original Research
Published on 14 Jul 2026
Eco-friendly pavement raveling detection based on in-situ data and transfer learning
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2026.1862791
- 424 views
Original Research
Published on 10 Jul 2026
A simplex-centroid designed eco-friendly acetate-based deicer: development, environmental assessment, and evaluation of its anti-icing performance
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2026.1698212
- 826 views
Original Research
Accepted on 09 Jul 2026
Machine Learning Based Prediction of Shear and Flexural Capacity of Reinforced Concrete Beams: A Parallel Modelling Framework with SHAP Interpretability and Design Code Benchmarking
in Structural Materials
Frontiers in Materials
- 201 views
Original Research
Accepted on 09 Jul 2026
Optimization of the Mechanical Properties of Concrete Using Graphite Tailings, Steel Fibers, and Nano-Silica Based on RSM-BBD
in Structural Materials
Frontiers in Materials
- 178 views
Original Research
Accepted on 08 Jul 2026
Study on the passivation and corrosion behaviors of steel bars in the cements made from high-belite calcium sulfoaluminate (HB-CSA) clinker
in Structural Materials
Frontiers in Materials
- 132 views
Original Research
Published on 07 Jul 2026
Experimental study on the mechanism and active prevention and control of crystalline clogging in tunnel drainage systems in limestone areas
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2026.1858512
- 666 views
Original Research
Published on 07 Jul 2026
Suppression of torsional fatigue cracking in a 35CrMo planetary carrier by QPQ treatment
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2026.1869575
- 443 views
Original Research
Accepted on 06 Jul 2026
Response Mechanism of Qanat Tunnel under High-Speed Railway Subgrade Load Considering the Influence of Intersection Angle: 3D DEM-FDM Numerical Study
in Structural Materials
Frontiers in Materials
- 177 views