Original Research
Accepted on 18 Feb 2026
Study on Mechanical Properties and Mesostructure of Subgrade Silty Sand under Freeze-Thaw Cycles
Frontiers in Materials
3,871 Publications
volumes
Volume 13 - 2026
Original Research
Accepted on 18 Feb 2026
Influence of Pre-wetted Process on the Performance and Enhancement Mechanism of Recycled Fine Aggregate Geopolymer Concrete
Frontiers in Materials
Original Research
Published on 18 Feb 2026
Performance evaluation of ternary solid waste-based geopolymer subgrade materials
Frontiers in Materials
doi 10.3389/fmats.2026.1774063
- 278 views
Original Research
Accepted on 17 Feb 2026
Conversion technology of steel reinforcement system for underground engineering lining
Frontiers in Materials
Original Research
Published on 17 Feb 2026
From quartzose sandstone to metallurgical grade silicon feedstock for photovoltaics: an integrated sieving, magnetic separation and acid leaching protocol
Frontiers in Materials
doi 10.3389/fmats.2026.1737892
- 302 views
Original Research
Accepted on 16 Feb 2026
Properties of Ultra-High Performance Geopolymer Concrete: Influence of Silica Fume
Frontiers in Materials
Original Research
Accepted on 13 Feb 2026
Molecularly imprinted polymers-coated gold iron nanoparticles for sensitive detection of ketamine via surface-enhanced Raman spectroscopy
Frontiers in Materials
Original Research
Accepted on 11 Feb 2026
The Effects of Different Surface Treatments on the Surface Properties and Microstructure of Restorative Materials: An in Vitro Study
Frontiers in Materials
- 103 views
Original Research
Published on 11 Feb 2026
Effects of pretreatment methods on stability and abrasion performance of steel slag asphalt mixture
Frontiers in Materials
doi 10.3389/fmats.2026.1785730
- 393 views
Original Research
Published on 11 Feb 2026
Enhancement of zirconia–veneering porcelain bond strength via thermal phosphoric acid etching combined with lithium Silicate Coating and the influence of multiple sintering cycles
Frontiers in Materials
doi 10.3389/fmats.2026.1769619
- 350 views
Original Research
Accepted on 10 Feb 2026
Fatigue safety estimation of eh690 high-strength steel and welded joints in extreme marine environments
Frontiers in Materials
Original Research
Accepted on 09 Feb 2026
Research and Application of High-Performance Artificial Aggregates Based on 3D Printing
Frontiers in Materials
Original Research
Accepted on 09 Feb 2026
Short-term performance optimization of steel fiber-reinforced concrete for roadway support
Frontiers in Materials
Original Research
Published on 09 Feb 2026
Ultra-high-strength geopolymer concrete influenced by mixture proportion and steel fiber: flowability, compressive strength, and flexural performance
Frontiers in Materials
doi 10.3389/fmats.2026.1781306
- 524 views
Original Research
Published on 09 Feb 2026
Research on factors influencing high temperature deformation of asphalt mixture and prediction modeling
Frontiers in Materials
doi 10.3389/fmats.2026.1751897
- 363 views
Original Research
Published on 06 Feb 2026
Study on the mechanical properties of plant fiber reinforced concrete: the relationship between incorporation methods and performance
Frontiers in Materials
doi 10.3389/fmats.2026.1778202
- 469 views
Original Research
Accepted on 05 Feb 2026
Effect of phosphorus and fluorine impurities on the properties and hydration mechanism of α-hemihydrate gypsum composite cementitious materials
Frontiers in Materials
- 131 views
Original Research
Published on 05 Feb 2026
Influence of ECAP passes on Zn–Li–Mn alloys: mechanics, corrosion, and osteogenesis
Frontiers in Materials
doi 10.3389/fmats.2026.1741586
- 457 views
Original Research
Published on 05 Feb 2026
Effect of fly ash content on the leaching resistance of shotcrete
Frontiers in Materials
doi 10.3389/fmats.2026.1753634
- 404 views
Original Research
Published on 04 Feb 2026
Surface roughness and preload loss of implant-supported screw retained three-unit framework fabricated by different techniques
Frontiers in Materials
doi 10.3389/fmats.2026.1763096
- 459 views
Original Research
Accepted on 02 Feb 2026
Experimental Study on Chemical Compatibility of Polymer Amended Bentonite Subjected to Inorganic Salt Solutions
Frontiers in Materials
- 174 views
Original Research
Accepted on 31 Jan 2026
Iron-Curcumin-Carboxy PTIO Coordinated Nanoparticles with Anti-Inflammatory Properties for Enhanced Diabetic Wound Healing
Frontiers in Materials
- 166 views
Volume 12 - 2025
Original Research
Published on 18 Feb 2026
Nano TiO2/ARA composite modified asphalt mixture mix ratio design and road performance research
Frontiers in Materials
doi 10.3389/fmats.2025.1739262
- 223 views
Original Research
Published on 12 Feb 2026
Influence of different silica fume contents on the leaching resistance of shotcrete
Frontiers in Materials
doi 10.3389/fmats.2025.1754919
- 323 views