Skip to main content

Molecular Simulation on Cementitious Materials: From Computational Chemistry Method to Application

Cover image for Research Topic "Molecular Simulation on Cementitious Materials: From Computational Chemistry Method to Application"
83kviews
Editorial: Molecular Simulation on Cementitious Materials: From Computational Chemistry Method to Application
Editorial20 December 2021
Editorial: Molecular Simulation on Cementitious Materials: From Computational Chemistry Method to Application

The use of molecular simulation has made great progress over recent years in the field of cement chemistry. The progress includes, but is not limited to, deriving a series of accurate force fields, decoding the realistic structure of calcium-silicate-hydrate (C-S-H), unraveling the interfacial reactivity and chemistry of cement minerals, and studying interactions between cement hydrates and organic/inorganic additives (e.g., cellulose) or corrosive substances (e.g., chloride ions) (Mishra et al., 2017; Pellenq et al., 2009; Zhang, et al., 2021). Molecular simulation can be used as a powerful tool to yield a profound scientific understanding of cementitious materials and their behaviors across several length scales (as shown in Fig. 1). Based on the understanding of intrinsic mechanisms, molecular simulation can complement experimental studies to offer more explicit and efficient guides for the design of cementitious materials.

It is our great pleasure to present this research topic on Molecular Simulation on Cementitious Materials: From Computational Chemistry Method to Application. The collection of 11 articles in this research topic further discovers the nanoscale nature of cementitious material and guides applications of nanotechnologies in cement-based materials. We expect that these studies will advance cement chemistry and concrete technology through the application of modern computational methodologies alone, or in conjunction with experimental techniques. These studies will also push forward development of eco-efficient cementitious materials along the three directions pointed out by Scrivener et al. (2018): enhancing usage of supplementary cementitious materials (SCMs); developing alternative cements; and enhancing the efficiency of cement (production and application).

So far, utilization of SCMs is still the most effective way to improve the eco-efficiency of cement and concrete. The most popular SCMs are normally from industrial waste streams (e.g., coal fly ash and ground granulated blast-furnace slag), which contain amorphous alumina apart from amorphous silica. Thus, when such SCMs are used to replace part of cement in the binder phase of concrete, the formed C-S-H gel often involves Al-uptake, forming calcium-aluminosilicate-hydrate (C-A-S-H) gel. To better understand the effect of Al-uptake, Zhang et al. used reactive force field molecular dynamics to reproduce the Al-induced cross-linking effect on the aluminosilicate chains in the C-A-S-H gel, which is a major hydrate phase of cement with SCMs. The chemical and fracture processes coupled in this study demonstrated the significant improvement of mechanical properties due to the incorporation of cross-linking aluminate structures.

When it comes to alternative binders, this research topic involves computational studies about alkali-activated materials, carbonation-hardening binders, and magnesium phosphate cement (MPC). Li et al. simulated a series of geopolymers using reactive force field molecular dynamics and Monte Carlo method. They found that the structure and mechanical properties of sodium aluminosilicate hydrate (N-A-S-H) gel is greatly dependent on sodium content: with Na/Al ratio rising, the aluminosilicate skeleton is transformed from an integral network to partially destroyed branch structures, reducing the stiffness and cohesive force of the gel. Wan et al. investigated the intrinsic mechanism for sodium dissolution (i.e., leaching) from the N-A-S-H gels of geopolymers. This study showed that sodium dissociation promotes a hydrolytic reaction, exacerbating the non-conservation of charge of the N-A-S-H system, and in the long term reduces the stability of the aluminosilicate skeleton. This finding is consistent with existing knowledge (Hou et al., 2014).

Carbonation-hardening binders have been attracting increasing attention because of their direct involvement of CO2 mineralization. It has been known that nanotechnology can effectively improve the carbonation reactivity and, thus, the mechanical properties, of carbonation-hardening binders. Tao et al. presented first-principles calculations for screening potential dopants for increasing the carbonation reactivity of γ-Ca2SiO4 crystals. It is found that the carbonation reactivity is related to the reactive site distribution and the binding strength of γ-Ca2SiO4; and Ba, P, and F elements can potentially decrease the overall binding strength, which benefits the dissolution and carbonation reactions. MPC is a widely studied alternative binder for niche functional applications (e.g., fast repair, metal protection, fire retardant, etc.) (Ma et al., 2014). Similar to carbonation-hardening binders, the hardening process of MPC relies on reactions between a base oxide and an acidic component, which is completely different from traditional cements and alkali-activated materials. Li et al. proposed an experimental-computational approach to study the mechanical properties of magnesium potassium phosphate hexahydrate – the basic binding phase in MPC.

To improve the efficiency of cement utilization, a commonly considered approach is to use nano-reinforcement/modifier for improving the mechanical and/or durability properties of cement-based materials. Zhou et al. used reactive molecular simulation to investigate the effect of an emerging two-dimensional (2D) material – 2D-silica – that is intentionally intercalated into the interlayer defective sites of C-S-H. This work may shed new light on the interaction mechanisms between 2D-materials and inorganic hosts, and provide solutions to modifying concrete against its high brittleness. Cement efficiency can also be improved by increasing strength and durability of concrete, since improved strength and durability imply needs of smaller volume of material in the construction stage and the whole life-cycle, respectively. Wang et al. advanced a well-known type of high-strength concrete (i.e., reactive powder concrete), and proved theoretically and experimentally that a well-selected delay (of start of steam curing after molding) can benefit the development of microstructure and strength. Realizing that high-strength concrete requires improved cracking resistance, Li et al. proposed a methodology to optimize high-strength concrete mix proportion towards better cracking resistance using artificial neural network and genetic algorithm. To better understand the durability of concrete so as to improve it, Xu et al. simulated the coupled penetration of sulfate ions and chloride ions into concrete, say, in marine service environment; and Liu et al. developed a meso-scale five-phase model to decode the complexity of the microstructure, as well as to describe the transport and distribution of water in recycled aggregate incorporated concrete. In addition, to a large extent, the true quality of concrete (no matter how well it is designed) is determined by its workability (how well it can be manipulated in the fresh state). To better understand the nature of workability, Li et al. simulated the slump and J-ring tests of highly flowable concrete using discrete element method.

The Guest Editorial team is confident that the successful application of computational methods will facilitate the fundamental research and technology development of cementitious materials.

2,209 views

2 citations

Insight Into the Strengthening Mechanism of the Al-Induced Cross-Linked Calcium Aluminosilicate Hydrate Gel: A Molecular Dynamics Study
ORIGINAL RESEARCH
18 February 2021
Insight Into the Strengthening Mechanism of the Al-Induced Cross-Linked Calcium Aluminosilicate Hydrate Gel: A Molecular Dynamics Study
Gaozhan Zhang, 3 more and Daosheng Sun

6,214 views

38 citations

ORIGINAL RESEARCH
8 February 2021
Simulation of the Flowability of Fresh Concrete by Discrete Element Method
Yue Li, 3 more and Jianglin Liu
The Discrete Element Method (DEM) was used to establish the slump model and J-Ring model of concrete to describe the flow behavior in the slump test and J-Ring test. Then, the contact parameters of particle-particle and particle-geometry for the concrete DEM model, including restitution coefficient, rolling friction coefficient, static friction coefficient and surface energy were measured. In order to avoid the influence of the shape and size of the aggregate, this paper used high-precision glass spheres as the aggregate of the concrete for meso calibration test, slump test and J-Ring test. Comparing the slump DEM model based on the JKR contact model and the determined contact parameters with the concrete slump test result, a very high agreement between the initial stage, the rapid flow stage and the slow flow stage of the Slump flow-Time curve can be found as well as the final slump and slump flow. Moreover, similar to the slump DEM model, the DEM model of the concrete J-Ring test was established to study the passing ability of concrete with outstanding accuracy. Therefore, the concrete DEM model with contact parameters and JKR model can be adopted to study the flow behavior of the fresh concrete.
Simulation of the Flowability of Fresh Concrete by Discrete Element Method

6,530 views

40 citations

Optimum Design of High-Strength Concrete Mix Proportion for Crack Resistance Using Artificial Neural Networks and Genetic Algorithm
The fact that high-strength concrete is easily to crack has a significant negative impact on its durability and strength. This paper gives an optimum design method of high-strength concrete for improving crack resistance based on orthogonal test artificial neural networks (ANN) and genetic algorithm (GA). First, orthogonal test is operated to determine the influence of the concrete mix proportion to the slump, compressive strength, tensile strength and elastic modulus, followed by calculating and predicting the concrete performance using ANN. Based on results from orthogonal test and ANN, a functional relationship among slump, compressive strength, tensile strength, elastic modulus and mix proportion has been built. On this basis, using the widely used shrinkage and creep models, the functional relationship between the concrete cracking risk coefficient and the mix proportion is derived, and finally GA is used to optimize the concrete mix proportion to improve its crack resistance. The research results showed that, compared with the control concrete, the cracking risk coefficient of the optimized concrete was reduced by 25%, and its crack resistance was significantly improved.

6,554 views

25 citations

ORIGINAL RESEARCH
20 January 2021
Mechanism Analysis of the Influence of Delay Period on Mechanical Properties of Reactive Powder Concrete
Xiaohui Wang, 2 more and Shuang Zhang

2,176 views

1 citations

Coupled Transport of Sulfate and Chloride Ions With Adsorption Effect: A Numerical Analysis
ORIGINAL RESEARCH
17 September 2020
Coupled Transport of Sulfate and Chloride Ions With Adsorption Effect: A Numerical Analysis
Jun Xu, 4 more and Wei She
In the marine environment, reinforced concrete will suffer from chloride ion erosion and sulfate ion erosion at the same time. However, most scholars only study the interaction mechanism between chloride ion and sulfate ion, and the consideration of physical adsorption and chemical combination caused by hydration products is not perfect. Based on the law of conservation of mass, this study integrates the relationship between porosity and hydration time, the weakening of chemical binding of sulfate ions to chloride ions into the mathematical model, establishes the coupling transport model of sulfate and chloride, and verifies the rationality of the model by comparing with the measured data. And then, the physical adsorption and chemical binding of chloride ions under the action of sulfate ions were quantitatively analyzed. It is found that chemical binding is dominant and sulfate ion will reduce the chemical binding effect of chloride ion. With the decrease of the initial water/cement ratio, the diffusion depth of free chloride ion will also decrease.

4,362 views

19 citations

ORIGINAL RESEARCH
21 September 2020
Numerical Simulation of Water Transport in Unsaturated Recycled Aggregate Concrete
Zhaolin Liu, 2 more and Yu Hu

3,671 views

16 citations

ORIGINAL RESEARCH
23 June 2020
Structure, Reactivity, and Mechanical Properties of Sustainable Geopolymer Material: A Reactive Molecular Dynamics Study
Zhipeng Li, 1 more and Muhan Wang

6,237 views

48 citations

ORIGINAL RESEARCH
8 September 2020
Screening Out Reactivity-Promoting Candidates for γ-Ca2SiO4 Carbonation by First-Principles Calculations
Yong Tao, 2 more and Fazhou Wang

3,318 views

20 citations

ORIGINAL RESEARCH
2 June 2020
A Molecular Dynamics Study on the Structure, Interfaces, Mechanical Properties, and Mechanisms of a Calcium Silicate Hydrate/2D-Silica Nanocomposite
Yang Zhou, 3 more and Jiale Huang
The incorporation of nano-reinforcements is believed to be a promising method to create high performance nanocomposites, which are largely dependent on the interfacial connections. In this work, the newly emerging two-dimensional (2D) material, 2D-silica is intentionally intercalated into the interlayer defective sites of calcium silicate hydrate (C-S-H), which is the primary hydration product of ordinary portland cements. The reactive molecular simulation results indicate the nano-reinforcement can strongly interact with the inorganic matrix to form a high-ductility nanocomposite. The uniaxial tensile loading tests show the plastic stage of the C-S-H is dramatically enhanced due to the intercalation of 2D-silica, which removes the intrinsic brittleness of cement-based materials at the nano-scale. It is observed that the dangling atoms at the edge of 2D-silica can react with non-bridging oxygen atoms of C-S-H, forming Si-O-Si bonds at interfaces. Those covalent bonds transform Q1 and Q2 in the C-S-H into high connectivity Q3 and Q4 species, which increases the integrity of the matrix and its resistance to crack propagation. During the tensile process, the elongation and breakage of those high-strength covalent bonds needs higher tensile stress and consumes higher energy, which leads to a strong plasticity and higher toughness. This work may shed new lights on the interaction mechanisms between 2D-materials and inorganic hosts, and provide solutions to modifying the brittleness of concrete.
A Molecular Dynamics Study on the Structure, Interfaces, Mechanical Properties, and Mechanisms of a Calcium Silicate Hydrate/2D-Silica Nanocomposite

5,483 views

24 citations

Insight Into the Leaching of Sodium Alumino-Silicate Hydrate (N-A-S-H) Gel: A Molecular Dynamics Study
ORIGINAL RESEARCH
24 March 2020
Insight Into the Leaching of Sodium Alumino-Silicate Hydrate (N-A-S-H) Gel: A Molecular Dynamics Study
Hongyan Wan, 1 more and Yu Zhang
This paper provides an intrinsic mechanism of alkalis dissolution from the gels of geopolymer at nanoscale, via a molecular dynamics (MD) investigation on N-A-S-H gel, the predominant binding phase in geopolymer. Sodium plays roles in balancing charges of [AlO4] tetrahedron, and its absence causes local structure to show negative charge, resulting in locally mutual repelling between tetrahedrons. Also, sodium dissociation promotes hydrolytic reaction, exacerbating non-conservation of charge of the N-A-S-H system, further swelling the structure. Above evolution weakens the alumino-silicate skeleton and reduces the stability of silicate and aluminate species, which in turn promotes sodium dissociation. In the long term, it increases the potential of structure depolymerization and even peeling off. Based on previously reported experiments and our computational results, it is presumably that leaching starts from N-A-S-H substrate surface, and the gel peels off layer by layer in the above manner, resulting in microscopic holes and fissures. In addition, leaching also leads to the degradation of mechanical properties of surface gel, including Young`s modulus, tensile strength, and ductility, which considerably increases the possibility of surface gel peeling. Besides, sodium is able to connect [AlO4] and [SiO4] tetrahedrons by the electrostatic force with tetrahedral oxygen, which transfers stress and contributes to uniform stress dispersion.

7,775 views

43 citations