CORRECTION article

Front. Mater., 28 November 2018

Sec. Structural Materials

Volume 5 - 2018 | https://doi.org/10.3389/fmats.2018.00073

Corrigendum: Nonlinear Oxidation Behavior in Pure Ni and Ni-Containing Entropic Alloys

  • 1. State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing, China

  • 2. State Key Laboratory of Nuclear Physics and Technology, Peking University, Beijing, China

  • 3. Department of Materials Science and Engineering, KTH Royal Institute of Technology, Stockholm, Sweden

  • 4. Thermo-Calc Software AB, Solna, Sweden

  • 5. Department of Chemistry, Applied Physical Chemistry, KTH Royal Institute of Technology, Stockholm, Sweden

In the original article, there was an error. An explanation should be inserted at the beginning of the section Thermodynamic Calculations, Paragraph 1, line 1:

In this as well as the following paragraphs the authors refer to phases such as halite, spinel, corundum etc. It thereby solely referred to the structure type and not the respective mineral.

In the original article, there was an error. The word “sfinancial” should be corrected to “financial” in the Acknowledgements section, Paragraph 1:

The Carl Tryggers Stiftelse för Vetenskaplig Forskning is gratefully acknowledged for financial support.

The authors apologize for these errors and state that they do not change the scientific conclusions of the article in any way. The original article has been updated.

Statements

Conflict of interest

The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.

Summary

Keywords

single-phase multicomponent alloys, oxidation, thermodynamic calculations, high-entropy alloys, nonlinear behavior

Citation

Xia S, Lousada CM, Mao H, Maier AC, Korzhavyi PA, Sandström R, Wang Y and Zhang Y (2018) Corrigendum: Nonlinear Oxidation Behavior in Pure Ni and Ni-Containing Entropic Alloys. Front. Mater. 5:73. doi: 10.3389/fmats.2018.00073

Received

05 October 2018

Accepted

12 November 2018

Published

28 November 2018

Volume

5 - 2018

Edited and reviewed by

Gang Wang, Shanghai University, China

Updates

Copyright

*Correspondence: Yong Zhang

This article was submitted to Structural Materials, a section of the journal Frontiers in Materials

Disclaimer

All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.

Outline

Cite article

Copy to clipboard


Export citation file


Share article

Article metrics