Original Research
Accepted on 10 Dec 2025
Simulation-Based Parameter Optimization and Experimental Assessment of Single-and Multi-Dimple Textures in Full-Film Lubrication
in Tribology
Frontiers in Mechanical Engineering
Type at least 3 characters
187 articles
articles
Original Research
Published on 03 Dec 2025
Study on robotic projectile launching based on multi-factor analysis and parameter optimization
in Tribology
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2025.1707301
- 310 views
Original Research
Published on 16 Jul 2025
Fretting wear of lubricated DLC coating systems
in Tribology
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2025.1584451
- 2,167 views
Original Research
Published on 02 Jul 2025
Mechanical characteristics analysis of the downhole completion string in the open hole section of a small wellbore
in Tribology
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2025.1554211
- 1,364 views
Original Research
Published on 06 Jun 2025
A model describing the oxidation rate of lubricating greases
in Tribology
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2025.1591795
- 1,936 views
- 1 citation
Original Research
Published on 30 May 2025
Effect of surfactant self-assembly on lubrication performance in oil-based systems: the role of reverse micelles and vesicles
in Tribology
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2025.1608716
- 1,743 views
Methods
Published on 21 May 2025
Preventing electrically induced subsurface initiated pitting failures (incl. WSF, WEC, WEA) with copper based lubricant additives
in Tribology
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2025.1585472
- 1,640 views
Editorial
Published on 18 Mar 2025
Editorial: Visualization techniques in tribology
in Tribology
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2025.1588494
- 1,320 views
Original Research
Published on 07 Mar 2025
An in situ experimental method for monitoring the viscosity change and oil amount during the sliding test
in Tribology
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2025.1522524
- 1,360 views
Original Research
Published on 20 Feb 2025
Evaluation of different erosion models for predicting guide vane wear in Francis turbine
in Tribology
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2025.1542074
- 2,378 views
- 1 citation
Original Research
Published on 17 Feb 2025
Hydrodynamic performance testing of artificial textures using a novel pin-on-disc test method
in Tribology
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2025.1473028
- 1,218 views
Original Research
Published on 21 Jan 2025
Mechanisms of cage noise generation in machine tool bearings
in Tribology
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2024.1469546
- 4,667 views
- 1 citation
Review
Published on 20 Dec 2024
Review on experimental investigation of sediment erosion in hydraulic turbines
in Tribology
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2024.1526120
- 16,861 views
- 8 citations
Original Research
Published on 19 Dec 2024
The effect of inner ring groove on leakage reduction in dry gas seals and its visualization verification
in Tribology
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2024.1488803
- 2,341 views
Original Research
Published on 27 Nov 2024
Studies on dielectric spectroscopy of oxidatively degraded Poly(α-olefin)
in Tribology
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2024.1504347
- 1,885 views
Original Research
Published on 25 Nov 2024
Exploring the additive compatibility and tribological behavior of regular and high oleic soybean oil
in Tribology
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2024.1488407
- 5,430 views
- 1 citation
Original Research
Published on 07 Nov 2024
Controlling windscreen wiper vibration through yaw angle adjustments: a study of dynamic contact behavior using fluorescence observation
in Tribology
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2024.1471045
- 3,444 views
Original Research
Published on 06 Nov 2024
Application of the electrical impedance method to steel/steel EHD point contacts
in Tribology
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2024.1489311
- 3,509 views
- 1 citation
Original Research
Published on 05 Nov 2024
Impedance measurement of rolling bearings using an unbalanced AC wheatstone bridge
in Tribology
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2024.1456618
- 2,668 views
- 2 citations
Original Research
Published on 31 Oct 2024
A study of measurement of raceway direct measurement of rolling bearings
in Tribology
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2024.1462450
- 1,655 views
Original Research
Published on 09 Oct 2024
Tribological and investigation study of a dlc-coated H13 friction drilling tool on AZ31B magnesium alloy
in Tribology
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2024.1470507
- 1,606 views
- 2 citations
Original Research
Published on 20 Sep 2024
The mechanism of small wear particles entrainment in friction under boundary lubrication
in Tribology
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2024.1470312
- 1,858 views
- 2 citations
Original Research
Published on 06 Sep 2024
A method for simultaneously measuring friction and gap at metal–lubricant interface by combined use of atomic force microscopy and line-and-space patterned metal films
in Tribology
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2024.1470775
- 2,402 views
- 2 citations
Original Research
Published on 21 Aug 2024
Visualising the lubrication condition in hydrodynamic journal bearings using impedance measurement
in Tribology
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2024.1456575
- 4,209 views
- 5 citations