Skip to main content

ORIGINAL RESEARCH article

Front. Plant Sci., 07 January 2021
Sec. Plant Breeding

Deciphering the Genetic Diversity of Landraces With High-Throughput SNP Genotyping of DNA Bulks: Methodology and Application to the Maize 50k Array

\r\nMariangela ArcaMariangela Arca1Tristan Mary-HuardTristan Mary-Huard1Brigitte GouesnardBrigitte Gouesnard2Aurlie BrardAurélie Bérard3Cyril BaulandCyril Bauland1Valrie CombesValérie Combes1Delphine MadurDelphine Madur1Alain CharcossetAlain Charcosset1Stphane D. Nicolas*Stéphane D. Nicolas1*
  • 1Université Paris-Saclay, INRAE, CNRS, AgroParisTech, GQE – Le Moulon, Gif-sur-Yvette, France
  • 2AGAP, Univ Montpellier, CIRAD, INRAE, Institut Agro, Montpellier, France
  • 3Université Paris-Saclay, INRAE, Etude du Polymorphisme des Génomes Végétaux, Evry-Courcouronnes, France

Genebanks harbor original landraces carrying many original favorable alleles for mitigating biotic and abiotic stresses. Their genetic diversity remains, however, poorly characterized due to their large within genetic diversity. We developed a high-throughput, cheap and labor saving DNA bulk approach based on single-nucleotide polymorphism (SNP) Illumina Infinium HD array to genotype landraces. Samples were gathered for each landrace by mixing equal weights from young leaves, from which DNA was extracted. We then estimated allelic frequencies in each DNA bulk based on fluorescent intensity ratio (FIR) between two alleles at each SNP using a two step-approach. We first tested either whether the DNA bulk was monomorphic or polymorphic according to the two FIR distributions of individuals homozygous for allele A or B, respectively. If the DNA bulk was polymorphic, we estimated its allelic frequency by using a predictive equation calibrated on FIR from DNA bulks with known allelic frequencies. Our approach: (i) gives accurate allelic frequency estimations that are highly reproducible across laboratories, (ii) protects against false detection of allele fixation within landraces. We estimated allelic frequencies of 23,412 SNPs in 156 landraces representing American and European maize diversity. Modified Roger’s genetic Distance between 156 landraces estimated from 23,412 SNPs and 17 simple sequence repeats using the same DNA bulks were highly correlated, suggesting that the ascertainment bias is low. Our approach is affordable, easy to implement and does not require specific bioinformatics support and laboratory equipment, and therefore should be highly relevant for large-scale characterization of genebanks for a wide range of species.

Introduction

Genetic resources maintained in situ or ex situ in genebanks represent a vast reservoir of traits/alleles for future genetic progress and an insurance against unforeseen threats to agricultural production (Tanksley, 1997; Hoisington et al., 1999; Kilian and Graner, 2012; McCouch et al., 2012). Due to their local adaptation to various agro-climatic conditions and human uses, landraces are particularly relevant to address climate change and the requirements of low input agriculture (Fernie et al., 2006; McCouch et al., 2012; Mascher et al., 2019). For instance, maize displays considerable genetic variability, but less than 5% of this variability has been exploited in elite breeding pools, according to Hoisington et al. (1999). However, landraces are used to a very limited extent, if any, in modern plant breeding programs, because they are poorly characterized, genetically heterogeneous and exhibit poor agronomic performance compared to elite material (Kilian and Graner, 2012; Strigens et al., 2013; Brauner et al., 2019; Hölker et al., 2019; Mascher et al., 2019). Use of molecular techniques for characterizing genetic diversity of landraces and their relation with the elite germplasm is essential for a better management and preservation of genetic resources and for a more efficient use of these germplasms in breeding programs (Hoisington et al., 1999; Mascher et al., 2019).

The genetic diversity of landraces conserved ex situ or in situ has been extensively studied using various types of molecular markers such as restriction fragment length polymorphism (RFLP) or simple sequence repeat (SSR) in maize (Dubreuil and Charcosset, 1998; Dubreuil et al., 1999, 2006; Rebourg et al., 1999, 2001, 2003; Gauthier et al., 2002; Reif et al., 2005a,b; Vigouroux et al., 2005; Camus-Kulandaivelu et al., 2006; Eschholz et al., 2010; Mir et al., 2013), in Pearl Millet (Bhattacharjee et al., 2002), cabbage (Dias et al., 1991; Mazzeo et al., 2019), Barley (Parzies et al., 2000; Backes et al., 2003; Hagenblad et al., 2012), pea (Hagenblad et al., 2012), oat (Hagenblad et al., 2012), rice (Ford-Lloyd et al., 2001; McCouch et al., 2012), Alfalfa (Pupilli et al., 2000; Segovia-Lerma et al., 2003), and fonio millet (Adoukonou-Sagbadja et al., 2007). SSRs have proven to be markers of choice for analyzing diversity in different plant species and breeding research, because of their variability, ease of use, accessibility of detection and reproducibility (Liu et al., 2003; Reif et al., 2006; Yang et al., 2011). Nevertheless, the development of SSR markers requires a substantial investment of time and money. Allele coding is also difficult to standardize across genotyping platforms and laboratories, a major drawback in a genetic resources characterization context. Single nucleotide polymorphisms (SNPs) have become the marker of choice for various crop species such as maize (Ganal et al., 2011), rice (McCouch et al., 2010), barley (Moragues et al., 2010), and soybean (Lam et al., 2010). They are the most abundant class of sequence variation in the genome, co-dominantly inherited, genetically stable and appropriate to high-throughput automated analysis (Rafalski, 2002). For instance, maize arrays with approx. 50,000 and 600,000 SNP markers are available since 2010 (Illumina MaizeSNP50 array, Ganal et al., 2011) and 2013 (600K Affymetrix Axiom, Unterseer et al., 2014), respectively. SNP arrays may, however, lead to some ascertainment bias notably when diversity analysis was performed on a plant germplasm distantly related from those that have been used to discover SNP put on the array (Nielsen, 2004; Clark et al., 2005; Hamblin et al., 2007; Inghelandt et al., 2011; Frascaroli et al., 2013). Properties of SNP array regarding diversity analysis have to be carefully investigated to evaluate ascertainment biais. For maize 50K Infinium SNP array, only “PZE” prefixed SNPs (so called later PZE SNPs in this study) give consistent results for diversity analysis as compared with previous studies based on SSR markers and are therefore suitable for assessing genetic variability (Ganal et al., 2011; Inghelandt et al., 2011; Bouchet et al., 2013; Frascaroli et al., 2013). 50K Infinium SNP array has been used successfully to decipher genetic diversity of inbred lines (van Heerwaarden et al., 2011; Bouchet et al., 2013; Frascaroli et al., 2013; Rincent et al., 2014), landraces using either doubled haploids (Strigens et al., 2013) or a single individual per accession (van Heerwaarden et al., 2011; Arteaga et al., 2016), or teosinte with few individuals per accession (Aguirre-Liguori et al., 2017).

Due to high diversity within accessions, characterization of landraces from allogamous species such as maize or alfalfa should be performed based on representative sets of individuals (Dubreuil and Charcosset, 1998; Segovia-Lerma et al., 2003; Reyes-Valdés et al., 2013; Gouda et al., 2020). Despite the recent technical advances, genotyping large numbers of individuals remains very expensive for many research groups. To bring costs down, estimating allele frequencies from pooled genomic DNA (also called “allelotyping”) has been suggested as a convenient alternative to individual genotyping using high-throughput SNP arrays (Sham et al., 2002; Teumer et al., 2013) or using Next Generation Sequencing (Schlötterer et al., 2014; Gouda et al., 2020). It was successfully used to decipher global genetic diversity within maize landraces using RFLPs (Dubreuil and Charcosset, 1998; Dubreuil et al., 1999; Rebourg et al., 2001, 2003; Gauthier et al., 2002) and SSR markers (Reif et al., 2005a; Camus-Kulandaivelu et al., 2006; Dubreuil et al., 2006; Yao et al., 2007; Mir et al., 2013). Various methods for estimating gene frequencies in pooled DNA have been developed for RFLP (Dubreuil and Charcosset, 1998), SSR (LeDuc et al., 1995; Perlin et al., 1995; Daniels et al., 1998; Lipkin et al., 1998; Breen et al., 1999) and SNP marker arrays in human and animal species (Hoogendoorn et al., 2000; Brohede et al., 2005; Craig et al., 2005; Gautier et al., 2013; Teumer et al., 2013). These methods have been successfully used to detect QTL (Lipkin et al., 1998), to decipher genetic diversity (Segovia-Lerma et al., 2003; Dubreuil et al., 2006; Pervaiz et al., 2010; Johnston et al., 2013; Ozerov et al., 2013), to perform genome wide association studies (Barcellos et al., 1997; Sham et al., 2002; Baum et al., 2007), to identify selective sweep (Elferink et al., 2012) or to identify causal mutation in tilling bank (Abe et al., 2012). Genotyping DNA bulks of individuals from landraces with SNP arrays could therefore be interesting to characterize and manage genetic diversity in plant germplasm. SNP arrays could be notably a valuable tool to identify selective sweep between landraces depending on their origin, to manage plant germplasm collection at worldwide level (e.g., identify duplicate), to identify landraces poorly used so far in breeding programs or to identify genomic regions where diversity has been lost during the transition from landraces to inbred lines (Arca et al., 2020).

In this study, we developed a new DNA bulk method to estimate allelic frequencies at SNPs based on Fluorescent Intensity data produced by the maize 50K Illumina SNP array (Ganal et al., 2011). Contrary to previous methods that have been mostly developed for QTL detection purposes, our approach is dedicated to genome-wide diversity analysis in plant germplasm since it protects against false detection of alleles. Additionally, calibration of equations for predicting allelic frequencies of DNA bulks for each SNP is based on controlled pools with variable allelic frequencies rather than only heterozygous genotypes as in previous methods (Hoogendoorn et al., 2000; Brohede et al., 2005; Peiris et al., 2011; Teumer et al., 2013). As a proof of concept, we applied our new approach to maize by estimating allelic frequencies of 23,412 SNPs in 156 maize landraces representative of European and American diversity present in genebanks (Arca et al., 2020). To our knowledge, it is the first time that a DNA bulk approach was used on 50K maize high-throughput SNP array to study genetic diversity within maize landraces germplasm.

Results

We developed a new method to estimate allelic frequencies of SNPs within pools of individuals using the fluorescent intensity ratio (FIR) between A and B alleles from Illumina MaizeSNP50 array. Briefly, allelic frequencies at SNPs belonging to MaizeSNP50 array were estimated within 156 maize landraces by pooling randomly 15 individuals per population and by calibrating a predictive two-step model (Figure 1). We considered only the subsample of 32,788 prefixed PZE markers (so called PZE SNPs) that have proven suitable for diversity analyses (Ganal et al., 2011). Among these SNPs, we selected 23,412 SNPs that passed weighted deviation (wd) quality criteria (wd > 50). This removed SNPs for which estimated allelic frequency deviated strongly from expected allelic frequency (Supplementary Figure 1A–G for the threshold choice and validation).

FIGURE 1
www.frontiersin.org

Figure 1. Two-step approach for estimating allelic frequency in DNA pools, exemplified by marker PZE-101005765. Red and green histograms correspond to the fluorescent intensity ratio (FIR) distribution for inbred lines homozygote for allele A (AA) and B (BB), respectively. Red and green curves indicate the corresponding Gaussian distributions. Red, Blue, and Green areas correspond to the FIR for which landraces are declared homozygous for allele A, polymorphic and homozygous for allele B after testing for fixation of alleles A and B. Dotted blue line corresponds to the curve of the logistic regression adjusted on 1,000 SNPs and two series of controlled pools. Blue crosses correspond to four different landraces represented by a DNA bulk of 15 individuals, with their observed FIR on X axis and predicted frequency on Y axis.

Accuracy of Allelic Frequency Prediction and Detection of Allele Fixation

In order to prevent erroneous detection of alleles within landraces, we first tested for each landrace whether allele A or allele B was fixed at a given SNP locus (Figure 1). We tested for each SNP whether the FIR of the landrace was included within one the two Gaussian distributions drawn from mean and variance of FIR of genotypes AA and BB within the inbred line panel (Figure 1). For landraces that were considered polymorphic after this first step (allele fixation rejected for both alleles), we estimated allelic frequency based on FIR by using a unique logistic regression model for the 23,412 SNPs, calibrated with a sample of 1,000 SNPs (Figure 1). Parameters of the logistic model were adjusted on these 1,000 SNPs using FIR of two series of controlled pools whose allelic frequencies were known (Supplementary Figure 2). We obtained these pools by mixing various proportion of two series of three inbred lines with known genotypes (Table 1). The 1,000 SNPs were selected to maximize the allelic frequency range within controlled pools (Table 1). The logistic regression was calibrated on 1,000 SNPs taken together rather than for each SNP individually to avoid the ascertainment bias that would be generated by selecting only SNPs polymorphic in the controlled pools (Supplementary Figure 3) and to reduce loss of accuracy in prediction for SNPs displaying limited allelic frequency range in two controlled pools (Supplementary Figure 4). To investigate the loss of accuracy of the prediction curve due to a reduction in allelic frequency ranges in controlled pool, we progressively removed at random from one to 15 samples from the calibration set of the 1000 above described SNPs. The mean absolute error (MAE) between 1,000 replications increased significantly from 4.14 to 8.54% when removing more samples (Table 2). For comparison, MAE was 7.19% using a cross-validation approach in which the predictive equation was calibrated with a random subsample of 800 out of 1000 SNPs, and then applied to estimate allelic frequencies for the remaining 200 SNPs (Supplementary Table 1). Calibrating the logistic regression between FIR and allelic frequency in controlled pool based on 1,000 SNPs therefore appears well adapted to prevent ascertainment bias while increasing globally prediction accuracy (Supplementary Figure 4). Finally, we observed that MAE was higher for balanced allelic frequencies than for almost fixed allelic frequencies (Figure 2 and Supplementary Table 2). Accordingly, the dispersion of predicted frequencies were larger for expected allelic frequencies near 0.5 than for fixed alleles (Supplementary Table 2).

TABLE 1
www.frontiersin.org

Table 1. Expected frequencies of allele B for the nine controlled pools obtained by varying the proportions of leaf weights of three inbred lines (L1, L2, L3) according to their genotypes at a bi-allelic SNP coded A/B.

TABLE 2
www.frontiersin.org

Table 2. Mean absolute error (MAE) in frequency estimation for 1,000 SNPs used to calibrate logistic regression equations.

FIGURE 2
www.frontiersin.org

Figure 2. Mean absolute error (MAE) according to the known allelic frequency in two series of controlled pools. MAE measured the absolute difference between allelic frequencies predicted by the two-step approach and those expected from the genotypes of parental lines in two series of controlled pools for 23,412 SNPs. MAE is averaged for each interval of expected allelic frequency across all SNPs.

Reproducibility of Frequency Across Laboratories and Samples

We evaluated the reproducibility of the method across laboratories by comparing FIR of one series of controlled pools from two different laboratories using all PZE SNPs or 23,412 SNPs selected using wd criterion (Figure 3). The coefficient of determination between the two different laboratories for controlled pools was very high (r2> 0.99) whether we selected the SNPs based on wd criterion or not. Beyond reproducibility across laboratories, the precision of frequency estimation depends on the sampling of individuals within landraces (Table 3). The precision of frequency estimation was addressed both by numerical calculation and by the independent sampling of 15 different individuals (30 different gametes) within 10 landraces (biological replicate). For both numerical calculations and biological replicates, the sampling error was higher for loci with balanced allelic frequencies than for loci that are close to fixation (Table 3 and Figure 4). Sampling error also decreased as the number of sampled individuals increased (Table 3). Considering a true frequency of 50% within landraces, we expect that 95% of frequency estimates lie between 31.30 and 68.70% when sampling 15 individuals per landrace and 42.9–57.13% when sampling 100 individuals per landrace (Table 3). Considering biological replicates, allelic frequencies of the two biological replicates over 23,412 SNPs were highly correlated except for population Pol3 (Supplementary Table 3). When excluding Pol3, 94.5% of points were located within the 95% confidence limits accounting for the effect of sampling alone, suggesting that the error inherent to the frequency estimation for DNA pools was very low compared to the sampling error (Figure 4). Over nine populations with replicates (excluding Pol3), we observed only four situations among 23,412 loci where two different alleles were fixed in the two replicates (Figure 4). Loci for which an allele was fixed in one replicate was either fixed or displayed a high frequency (above 88%) for the same allele in the other replicate in 98% of cases. Moreover, we estimated pairwise Roger’s genetic distance (Modified Roger’s Distance, MRD) based on 23,412 SNPs between the two independent pools from the same landraces. Excluding population Pol3 (MRD = 0.208), this distance ranged from 0.087 to 0.120 (Supplementary Table 3). These values provide a reference to decide whether two populations can be considered different or not.

FIGURE 3
www.frontiersin.org

Figure 3. Relationship between fluorescent intensity ratio of European Flint controlled pools genotyped in two different laboratories: CNG and Consortium. Each dot represents the combination of one out 9 controlled pools and one out of 23,412 PZE SNPs. Coefficient of determination (r2) between FIR of two laboratories is 0.992.

TABLE 3
www.frontiersin.org

Table 3. Sampling error estimated by numerical calculation for one or two biological replicates with independent sampling of 15 or 100 individuals within landraces.

FIGURE 4
www.frontiersin.org

Figure 4. Relationship between allele frequencies predicted for two biological replicates of 9 landraces over 23,412 selected SNPs. Each dot represents one landrace and one SNP, with allele frequency of replicates 1 and 2 on X and Y axes, respectively. Blue line indicates linear regression. 94.5% of points are included in the red ellipse that represents the 95% confidence limit accounting for the effect of sampling alone. r2 between replicates is 0.93.

Effect of SNP Number and wd on the Relationship of Genetic Distance Estimated With SNP and SSR

Finally, we evaluated the possible ascertainment bias due to SNP selection with our filtering based on wd criterion. MRD obtained with 17 SSR markers (MRDSSR) and MRD based on different set of SNP markers (MRDSNP) were highly correlated (Figure 5), indicating a low ascertainment bias. The selection of SNPs based on wd quality criterion strongly increased the coefficient of determination (r2) between MRDSNP and MRDSSR, from 0.587 to 0.639 (Supplementary Figure 6). We attempted to define the minimal SNP number required to correctly describe the relationship between maize landraces. While increasing the number of SNPs from 500 to 2500 slightly increased r2 between MRDSNP and MRDSSR from 0.606 to 0.638 (Supplementary Figures 6D–F), we observed no further increase beyond 2500 SNPs (Supplementary Figure 6A–C) suggesting that 2,500 SNPs are enough to obtain a correct picture of landrace relationships.

FIGURE 5
www.frontiersin.org

Figure 5. Relationship between Modified Roger’s Distances (MRD) obtained with 17 SSRs and 23,412 SNPs for 156 landraces. Each dot represents one pair of landraces. Red dotted lines represents linear regression between MRDSSR and MRDSNP. Coefficient of determination (r2) is reported on the plot.

Discussion

A molecular approach for diversity analysis of landraces needs to answer several criteria (i) an accurate estimation of allelic frequency in each population, (ii) a robust and reproducible measurement of allelic frequency across laboratories in order to facilitate comparison of genetic diversity of accessions across genebanks, (iii) a reliable estimate of genetic distance between landraces with no or little ascertainment bias, and (iv) an affordable, high-throughput and labor efficient method, due to both strong financial and human constraints in plant genebanks. Four main sources of errors affect the accuracy of allelic frequency estimation of a locus in a population using a DNA pooling approach: (i) the sampling of individuals (so called “sampling” errors), (ii) the procedure to mix DNA from individuals (so called “DNA mixing” errors) (iii) the imprecision of quantitative measurement used by the model for the prediction (so called “experimental” errors), and (iv) the predictive equation used to predict allelic frequency in a population (so called “approximation” errors).

A Two-Step Model to Protect Against Erroneous Detection of Polymorphism and Predict Accurately Allelic Frequencies in DNA Bulk

Approximation errors due to predictive equation depend on (i) the model used to predict allelic frequencies and (ii) the set of individuals and SNPs used to calibrate the predictive equation. In this study, we used a two-step modeling using inbred lines and controlled pools as sets of calibration to test for polymorphism and then predict allelic frequency for polymorphic markers. Detection of allele fixation in a population is an important issue for deciphering and managing genetic diversity within plant and animal germplasm. We used two Student tests based on FIR distribution of lines homozygous for allele A and B to determine polymorphism of a SNP in a given landrace (Figure 1). In this first step, we preferred a method based on FIR distribution rather than the clustering approach implemented in genome studio because it is possible to control the type I risk of false allele detection (at 5% in our study). Using this two-step approach reduces strongly the erroneous detection of polymorphisms in a population compared to previous methods: MAE for fixed locus <0.1% in our approach (Supplementary Table 2) vs ∼2–3% using PPC method (Brohede et al., 2005) or ∼2–8% using different k correction from Peiris et al. (2011). This is not surprising as previous methods focused on an accurate estimation of the difference in allele frequencies between DNA bulks of individuals contrasted for a quantitative trait of interest (Sham et al., 2002; Craig et al., 2005; Kirov et al., 2006; Teumer et al., 2013) and did not focus specifically on protecting again false detection of alleles.

For loci that were detected as polymorphic, we predicted allelic frequencies from FIR in landrace DNA pools by using a unique logistic regression for 23,412 SNPs passing wd quality criterion. The relationship between FIR and allelic frequency was modeled using a quasi-logistic regression for different reasons. First, the logistic function ensures that the predicted frequencies take value in (0,1), a property that is not satisfied by polynomial regression (PPC) or tan transformation (Brohede et al., 2005; Teumer et al., 2013). Second, one could observe that the relationship between the FIR and allelic frequencies within controlled pools was not linear (Supplementary Figure 2).

This two-step approach led to a low global error rate in allelic frequency prediction (MAE = 3% for polymorphic and monomorphic loci considered jointly; Figure 2 and Supplementary Table 2). It is comparable to the most accurate previous pooling DNA methods for SNP array that used a specific model for each SNP: (i) MAE ranging from 3 to 8% (Peiris et al., 2011) or 5–8% (Brohede et al., 2005) depending of k-correction applied (ii) MAE ∼ 3% for PPC correction (Brohede et al., 2005; Teumer et al., 2013) (iii) MAE ∼ 1% for tan-correction (Teumer et al., 2013). Several factors can explain this relative good global accuracy of our approach. First, almost half of the loci were fixed on average in each landrace, which contributed positively to global accuracy since our method over-performed previous methods for fixed locus (see above). Second, wd quality criterion removed SNPs for which allelic frequencies were poorly predicted using FIR. We observed indeed that increasing the threshold for wd quality criterion led to a global increase in accuracy at both steps (Supplementary Figure 1). While 90% of SNPs have a MAE <2% for wd criterion >10, only 50% of SNPs have a MAE <2% for wd criterion <10. Taking into account differential hybridization by using a specific logistic regression for each SNP could be a promising way to further improve the accuracy of allelic frequencies prediction, notably for balanced allelic frequencies (Brohede et al., 2005; Peiris et al., 2011; Teumer et al., 2013). To limit possible ascertainment bias and errors in allelic frequency estimation, it requires, however, to genotype additional series of controlled pools for SNPs for which current controlled pools were monomorphic or have a limited range of allelic frequency (Supplementary Figures 3, 4).

To estimate the parameters of the logistic regression, we used two series of controlled pools rather than heterozygous individuals for both technical and practical reasons. Controlled pools cover more homogenously the frequency variation range than heterozygous and homozygous individuals only, which therefore limits the risk of inaccurate estimation of logistic model parameters. Different studies showed that accuracy of allelic frequency estimation strongly depends on accuracy of FIR estimation for heterozygous individual and therefore the number of heterozygous individuals (Le Hellard et al., 2002; Simpson, 2005; Jawaid and Sham, 2009). Between 8 and 16 heterozygous individuals are recommended to correctly estimate FIR mean for heterozygous individuals, depending on FIR variance (Le Hellard et al., 2002). In maize, we can obtain heterozygote genotypes either by crossing inbred lines to produce F1 hybrids, by planting seeds from maize landraces, or by using residual heterozygosity of inbred lines. Using residual heterozygosity to calibrate model is not possible since half SNPs show no heterozygous genotype in the 327 inbred lines of our study. Obtaining at least 16 heterozygous individuals for each SNP therefore requires to genotype a few dozens of F1 hybrids or individuals from landraces considering that expected heterozygosity in a landrace is comprised between 3 and 28% (Arca et al., 2020). This represents additional costs since maize researchers and breeders genotyped preferentially inbred lines to access directly haplotypes without phasing and because genotypes of F1 hybrids can be deduced of that of their parental inbred lines. Beyond allogamous species as maize, genotyping heterozygous individuals could be time demanding and very costly in autogamous cultivated plant species for which genotyped individuals are mostly homozygotes (wheat, tomato, rapeseed). On the contrary, one can easily produce controlled pools whatever the reproductive system, either by mixing DNA or equal mass of plant materials, which allows producing a wide range of allelic frequencies.

Effect of DNA Mixing Procedure on Accuracy Allelic Frequency Estimation

There are two main errors coming from DNA mixing procedure: (i) the “sampling error” that is directly connected to the number of individuals sampled in each population (Table 3), and (ii) the “bulking error” associated with the laboratory procedure to mix equal DNA amounts of sampled individuals.

We evaluated sampling and bulking errors by comparing 10 independent biological replicates from 10 different landraces obtained by independently sampling and mixing equal leaf areas of young leaves of 15 individuals. Allelic frequencies estimated for both biological replicates from a same landrace were highly correlated. Excluding Pol3, 94.5% of difference of allelic frequencies between replicates was of included within 95% confidence limits originated from sampling effect only Figure 4). This suggests that the “bulking error” is low compared to the “sampling error”. Consistently, Dubreuil et al. (1999) observed a low “bulking error” for RFLP markers using the same DNA pooling method, with a coefficient of determination of 0.99 between allelic frequencies based on individual genotyping of plants and those predicted using DNA bulks. Several studies also showed that the effect of bulking errors on allelic frequencies measured by comparing DNA pool and individual genotyping of plant of this DNA pool is very low compared with other sources of errors (Le Hellard et al., 2002; Jawaid and Sham, 2009). Additionally, the mixing procedure starting from leaf samples strongly reduced the number of DNA extractions for each DNA bulk as compared to first extracting DNA from each individual, and then mixing by pipetting each DNA samples to obtain an equimolar DNA mix (“post-extraction” approach). Since the cost of DNA extraction becomes non-negligible when the number of individual increases, mixing plant material based on their mass before extraction is highly relevant to save time and money. This can be done without losing accuracy as shown in this study for SNP array and previously for RFLP by Dubreuil et al. (1999).

We highlighted the critical importance of the number of individuals sampled per landrace on allelic frequency estimation (Table 3). By using DNA pooling, accuracy can be gained with very little additional cost by increasing number of sampled individuals. Whereas a high accuracy of allelic frequency estimation within landraces is required to scan genome for selective sweeps, it is less important to estimate global genetic distance, due to the large number of SNPs analyzed. Sampling fifteen plants per population (30 gametes) appears convenient to obtain an accurate estimation of frequencies in a population and analyze genetic diversity (Reyes-Valdés et al., 2013; Gouda et al., 2020).

A Low Ascertainment Bias to Estimate Genetic Distance Between Landraces

There are two possible sources of ascertainment bias using a DNA pooling approach on a SNP array. The first one relates to the design of array because the set of lines to discover SNPs may not well represent genetic diversity and a threshold in allelic frequency was possibly applied to select SNPs. The second one relates to the selection of a subset of SNPs from the array regarding the genetic diversity of samples in calibration set used to predict allelic frequencies.

To avoid risk of ascertainment bias due to selection of markers genotyped by the array, the logistic regression model was adjusted on 1,000 SNPs with the largest allelic frequency range rather than for each of the 23,412 PZE SNPs individually. Using a specific model for each SNP would indeed conduct to discard markers monomorphic in controlled pools and therefore select only markers polymorphic between parents of controlled pool. Note that the same issue would be raised by using heterozygous individuals since 8–16 heterozygotes were recommended to adjust a logistic regression. Using heterozygous individuals and SNP specific equations could lead to systematically counter-select SNPs with low diversity. It could also lead to systematically remove SNPs that are differentially fixed between isolated genetic groups, because no or very few heterozygote individuals are available.

We also evaluated ascertainment bias by comparing Modified Roger’s Distance (MRD) between the 156 landraces obtained using SNPs (MRDSNP) and SSRs (MRDSSR) (Camus-Kulandaivelu et al., 2006; Mir et al., 2013), which display no or limited ascertainment bias. MRDSNP was highly correlated with MRDSSR (r2 = 0.64; Figure 5). This correlation is high considering that SSR and SNP markers evolve very differently (mutation rate higher for SSRs than SNPs, multiallelic vs biallelic), that the number of SSR markers used to estimate genetic distance is low and that errors in allelic frequency prediction occur for both SNPs and SSRs. For comparison, correlation was lower than between Identity By State estimated with 94 SSRs and 30K SNPs in a diversity panel of 337 inbred lines (r2 = 0.41), although very few genotyping errors are expected in inbred lines (Bouchet et al., 2013). Using the wd criterion significantly increased the correlation between MRDSNP and MRDSSR markers for 156 landraces (Supplementary Figure 5). It suggests that the wd criterion removes SNP markers that blurred the relationships between landraces. We can therefore define a subset of 23,412 SNPs to analyze global genetic diversity in landraces. This is in agreement with previous studies in inbred lines showing that PZE SNPs are suitable to analyze the genetic diversity in inbred lines (Ganal et al., 2011; Inghelandt et al., 2011; Bouchet et al., 2013; Frascaroli et al., 2013). These studies showed that diversity analysis based on PZE SNPs give consistent results with previous studies based on SSR markers (Inghelandt et al., 2011; Bouchet et al., 2013; Frascaroli et al., 2013).

The DNA pooled-sampling approach therefore provides a reliable picture of the genetic relatedness among populations that display a large range of genetic divergence and opens a way to explore genome-wide diversity along the genome.

An Affordable, High-Throughput, Labor-Efficient and Robust Method Compared to SSR/RFLP Markers and Sequencing Approaches

Using SNP arrays instead of SSR/RFLP marker systems or sequencing approaches has several advantages. First, SNP genotyping using arrays is very affordable compared to SSR/RFLP or resequencing approaches because it is highly automatable, high-throughput, labor-efficient and cost effective (currently 30–80€/individual depending of array). Obtaining accurate estimations of allelic frequencies using a whole genome sequencing (WGS) approach requires high depth and coverage for each individual because of the need of counting reads (Schlötterer et al., 2014; Rode et al., 2018). To estimate allelic frequency in DNA bulks, WGS remains costly compared to SNP arrays for large and complex genomes of plant species as maize. Different sequencing approaches based either on restriction enzyme or sequence capture make it possible to target some genomic regions and multiplex individuals, reducing the cost of library preparation and sequencing while increasing the depth for the selected regions (Glaubitz et al., 2014; Gouda et al., 2020). However, these sequencing approaches remain more expensive than SNP arrays and require laboratory equipment to prepare DNA libraries and strong bioinformatics skills to analyze sequencing data. These skills are not always available in genebanks. With the maize 50K array, FIR measurement used to predict allelic frequencies were highly reproducible both across laboratories and batches (r2 = 0.99; Figure 3). We can therefore consistently predict allelic frequencies using 50K array in new DNA pools genotyped in other laboratories, by applying the same parameters of presence/absence test and logistic regression as in this study. This will greatly facilitate the comparison of accessions across collections and laboratories. This is a strong advantage over SSRs for which a strong laboratory effect has been observed for the definition of alleles, leading to difficulties for comparing genetic diversity across seedbanks and laboratories (Mir et al., 2013). Similarly, one can expect some laboratory effect for sequencing approaches due to preparation of library and bioinformatics analysis. However, there is some disadvantage to use SNP arrays instead of SSR markers or sequencing approach. First, SNP marker are bi-allelic whereas SSRs are multi-allelic. At a constant number of markers, using SNPs rather than SSRs therefore leads to less discriminative power (Laval et al., 2002; Hamblin et al., 2007). This disadvantage is largely compensated by the higher number of SNPs and the fact that SNPs are more frequent and more regularly spread along the genome than SSR/RFLP, allowing genome wide diversity analyses. Second, contrary to SSR/RFLP markers and sequencing approach, SNP array does not allow one to discover new polymorphisms, which may lead to ascertainment bias for diversity analysis of new genetic groups (Nielsen, 2004; Clark et al., 2005; Hamblin et al., 2007; Inghelandt et al., 2011; Frascaroli et al., 2013). Comparison with SSRs results showed that PZE SNPs provide reliable genetic distances between landraces, suggesting a low ascertainment bias for a global portrayal of genetic diversity (see above). Sequencing techniques may be interesting in a second step to identify, among preselected accessions, those which show an enrichment in new alleles.

The number of SNPs affects the estimates of relationship between landraces and population structure (Moragues et al., 2010). In our study, the correlation coefficient between MRDSNP and MRDSSR increased with increasing number of SNPs and reached a plateau for 2,500 SNPs (Supplementary Figure 6). This suggests that increasing the number of SNPs above 2,500 does not provide further improvement in precision to estimate relationships between landraces as compared to 17 SSRs. Our approach could therefore be made further cost efficient by selecting less loci for studying global genetic relationships and genetic diversity. For maize, a customizable 15K Illumina genotyping array has been developed that includes 3,000 PZE SNPs selected for studying essential derivation (Rousselle et al., 2015) and 12,000 others selected for genetic applications such as genomic selection. Alternatively, the same approach could be applied to other genotyping arrays with higher density as the 600K Affymetrix Axiom Array (Unterseer et al., 2014) to gain precision in detection of selective footprints.

Conclusion

The DNA pooling approach we propose overcomes specific issues for genetic diversity analysis and plant germplasm management purposes that were not or partially addressed by previous methods which were mostly focused on QTL analysis and genome wide association studies (Hoogendoorn et al., 2000; Brohede et al., 2005; Craig et al., 2005; Teumer et al., 2013). As proof of concept, we used the DNA pooling approach to estimate allelic frequencies in maize landraces in order to identify original maize landraces in germplasm for pre-breeding purposes and selective footprints between geographic and/or admixture groups of landraces cultivated in contrasted agro-climatic conditions (Arca et al., 2020). Our approach could be very interesting for studying plant germplasm since time, money and molecular skills can be limiting factors to study and compare large collections of landraces maintained in seedbank (Mir et al., 2013; Diaw et al., 2020). Applications could be expanded to QTL identification in pools (Gallais et al., 2007), detecting signatures of selection in multi-generation experiments, or detection of illegitimate seed-lots during multiplication in genebanks. The DNA pooling approach could be easily applied to decipher organization of genetic diversity in other plant germplasm since Infinium Illumina HD array have been developed for several cultivated plant species, including soybean, grapevine, potato, sweet cherry, tomato, sunflower, wheat, oat, brassica crops and also animal species.

Materials and Methods

Plant Material

Landraces

A total of 156 landrace populations (Supplementary Table 4) were sampled among a panel of 413 landraces capturing a large proportion of European and American diversity and analyzed in previous studies using RFLP (Dubreuil and Charcosset, 1998; Rebourg et al., 1999, 2001, 2003; Gauthier et al., 2002) and SSR markers (Camus-Kulandaivelu et al., 2006; Dubreuil et al., 2006; Mir et al., 2013).

Each population were represented by a bulk of DNA from 15 individual plants, mixed in equal amounts as described in Reif et al. (2005a) and Dubreuil et al. (2006). In order to analyze the effect of individual sampling on allelic frequency estimation (see below), ten populations were represented by two DNA bulks of 15 plants sampled independently (Table 3).

Controlled DNA Pools

To calibrate a prediction model for SNP allelic frequencies in populations, we considered two series of nine controlled pools derived from the mixing of two sets of three parental inbred lines: EP1 – F2 – LO3 (European Flint inbred lines) and NYS302– EA1433 – M37W (Tropical inbred lines).

For each set of three parental lines, we prepared nine controlled pools by varying the proportion of each line in the mix (Table 1), measured as the number of leaf disks with equal size according to Dubreuil et al. (1999). The proportion of lines 2 and 3 (EA1433 and M37W or F2 and LO3) varies similarly whereas line 1 (EP1 or NYS302) varies inversely. The genotype of the inbred lines and the proportion of each inbred line in each pool give the expected allelic frequencies as shown in Table 1. Combination of genotypes in parental lines can conduct either to monomorphic or polymorphic controlled pools if the genotypes of 3 parental lines are the same or not, respectively. If we exclude monomorphic controlled pools and heterozygote SNPs in parental lines, these different combinations conduct to four different polymorphic configurations in the nine controlled pools, corresponding to four ranges of allelic frequencies: 1–33% (R1), 33–50% (R2), 51–67% (R3), 67–99% (R4), (Table 1). Combination of R1 and R4 configurations in two series of controlled pools displayed the largest allelic frequencies range (1–99%) while combination of R2 and R3 displayed a more reduced allelic frequency range (33–67%).

Inbred Lines

To test for allele fixation within landraces, we used a panel of 333 inbred maize lines representing the worldwide diversity well characterized in previous studies (Camus-Kulandaivelu et al., 2006; Bouchet et al., 2013; Supplementary Table 5). This panel includes the six inbred lines used to build two series of controlled pools.

Genotyping

We used the 50K Illumina Infinium HD array (Ganal et al., 2011) to genotype (i) 166 DNA bulks representing 156 landraces, (ii) 18 DNA bulks representing 2 series of controlled DNA pools, and (iii) 333 inbred lines. 50K genotyping was performed according to the manufacturer’s instructions using the MaizeSNP50 array (IlluminaInc, San Diego, CA, United States). The genotype results were produced with GenomeStudio Genotyping Module software (v2010.2, IlluminaInc) using the cluster file MaizeSNP50_B.egt available from Illumina. The array contains 49,585 SNPs passing quality criteria defined in Ganal et al. (2011).

We also used 17 SSRs genotyping data from 145 and 11 landraces analyzed by Camus-Kulandaivelu et al. (2006) and Mir et al. (2013), respectively.

Measurement Variable: Fluorescence Intensities Ratio

The MaizeSNP50 array has been developed into allele-specific single base extension using two colors labeling with the Cy3 and Cy5 fluorescent dyes. The fluorescent signal on each spot is digitized using GenomeStudio software. Data consist of two normalized intensity values (x,y) for each SNP, with one intensity for each of the fluorescent dyes associated with the two alleles of the SNP. The alleles measured by the x intensity value (Cy5 dye) are arbitrary, with respect to haplotypes, are called the A alleles, whereas the alleles measured by the y intensity value (Cy3 dye) are called the B alleles.

We assumed that the strength of the fluorescent signal of each spot is representative of the amount of labeled probe associated with that spot. The amount of labeled probes at each spot relies upon the frequency of the corresponding alleles of PCR product immobilized on it. Based on this assumption, the FIR of each spot (y/(x+y)) can be employed to estimate the allele frequency of DNA bulk immobilized on it.

To test the reproducibility of the measurement the controlled pool of European lines was genotyped twice in two platforms, at CNG Genotyping National Center, Evry 91, France, and at Trait Genetics.

SNP Filtering and Quality Control

For the purpose of this study, we used only the subset of 32,788 markers contributed by the Panzea project,1 so called PZE SNPs, developed on the basis of US NAM founders (Zhao et al., 2006). These SNPs represent a comprehensive sample of the maize germplasm and are therefore suitable for diversity analysis (Ganal et al., 2011).

The following Eq (1) was then used to create a rank score (weighted deviation, wd) for each SNP in order to identify and remove those of poor quality,

w d = | μ A A - μ B B | N A A σ A A 2 + N B B σ B B 2 N A A + N B B (1)

where μAA and σAA and μBB and σBB are the mean and the standard deviation for the fluorescence intensity ratios of AA and BB genotypes for the 327 inbred lines panel and NAA and NBB is the number of inbred lines with genotype AA or genotype BB, respectively. To avoid selection bias, loci which were monomorphic within the reference inbred lines population were selected using the wd Eq (1), assuming μAA = 0 and σAA = 0 for monomorphic BB SNPs or assuming μBB = 1 and σBB = 0 for monomorphic AA SNPs.

This criterion removes from analysis those SNPs for which distributions of fluorescence signal ratios for AA and BB genotypes of 327 inbred lines panel overlap or have large variances. To analyze genetic diversity, we first selected 23,656 with wd above 50 among 32,788 PZE SNPs. This threshold removed SNPs displaying high error rate in allelic frequency prediction (Supplementary Figure 1). In addition, we removed 244 SNPs that were heterozygous in one of parental lines of controlled pools and that displayed high error rate in allelic frequency prediction (data not shown).

Alleles Detection and Allele Frequency Estimation

Allele frequency estimation within DNA pools was implemented as a two-step process. We first determined the fixation of alleles A and/or B by comparing the fluorescent ratio of DNA pools at a given SNP locus with the distribution of the fluorescent signal of inbred lines (see above) which have AA or BB genotypes at the same locus. We assumed Gaussian distributions for the fluorescent intensities and tested for fixation using a Student’s t-tests with a 5% type I nominal level.

In second step, for each SNP for which alleles A and B were both declared present, the allelic frequency of allele B (fB) was inferred using the following generalized linear model:

g ( f B ) = + β y x + y (2)

where x and y are the fluorescent intensities at SNP for alleles A and B respectively, α and β are the parameters of a logistic curve, calibrated on fluorescent ratio data from controlled pools for 1,000 SNPs. As allele B frequency is a binomial variable, GLM was set with a logit link function (R, version 3.0.3).

The calibration sample of 1,000 SNPs consists in 250 randomly selected SNPs for each possible configuration (R1, R2, R3, R4 defined in Table 1). It was preferred to a calibration sample of all SNPs or to a specific prediction curve for each SNPs, in order to have a homogeneous distribution of observations into each class of expected frequency. Calibrating the model for each SNP would lead to high error in allelic frequency prediction, notably for monomorphic controlled pools as exemplified by Supplementary Figure 3, 4. Calibrating model for all SNPs would give strong weight to fixed allele in calibration due to large number of monomorphic controlled pools that are homozygous either for allele A or B.

Accuracy of Allelic Frequency Estimation

We assessed the accuracy of allele frequency estimates from pooled DNA samples by calculating the absolute difference between allelic frequencies of the B allele predicted by our two-step model and those expected for controlled pools from the genotype of their six parental lines. We obtained expected allelic frequencies for two series of controlled pools by weighting the allelic frequency of each parental line (0 or 1) by their relative mass in the mix (Table 1). We obtained genotypes of inbred lines from clustering by genome studio. This absolute difference was averaged over SNPs and samples in order to obtain MAE.

We first evaluated the MAE for 23,412 SNPs in the two series of controlled pools (Supplementary Table 2 and Figure 2). In order to estimate the effect of the calibration set of individuals and SNPs on the accuracy of allelic frequency prediction, we applied two cross-validation approaches on the 1000 SNPs and the two series of controlled pools and six parental inbred lines (24 samples) used to calibrate parameters of the common logistic regression. In order to evaluate the effect of SNP calibration set (Supplementary Table 1), we repeated five time a K-fold approach in which 1000 SNPs were split randomly in a training set of 800 SNPs on which we calibrated our two-step model and a validation set of 200 SNPs on which we predicted allelic frequency using this model in same two series controlled pools and estimated MAE. In order to evaluate the effect calibration samples (Table 2), we repeated 1000 times a K-fold approach on 1,000 SNPs in which 1, 3, 5, 8, 10, 15 samples among 18 from controlled pools were randomly removed from the calibration set. We used the remaining samples to estimate parameters of the logistic regression, and then predicted allelic frequencies using this predictive equation in these K removed samples (Table 2).

To estimate sampling error (Table 3), we estimated the 95% confidence interval of the allelic frequency in the population considering various observed allelic frequency obtained by sampling either 15, 30, 100, or 200 individuals from this population. To obtain the lower and upper bound of the 95% confidence interval for allelic frequency in the population, we considered the binomial probability to obtain various number of allele B in 15, 30, 100, 200 individuals (estimated allelic frequencies) from a population (true allelic frequencies) by using binom.confint function implemented in R package “binom.” We used the following parameters: binom.confint(x = number of alleles observed, n = 2number of individuals, conf.level = 95%, methods = exact) with x = number of successes and n = number of trial in the binomial experiment.

Comparison of Genetic Distance Between SNP and SSR Markers

We calculated the MRD (Rogers, 1972) based on allelic frequency data between landraces using different sets of markers to analyze the effect of the wd criterion (Supplementary Figure 5) and of the number of markers (Supplementary Figure 6) on the estimation of relatedness. To analyze the effect of wd criterion, we selected four random sets of 2,000 SNPs with different wd ranges (0–20, 20–40, 40–60, 60–80) among 32,788 PZE SNPs. To analyze the effect of SNP number, we selected six random sets of SNPs with various number of SNPs (15,000, 10,000, 5,000, 2,500, 1,000, 500) among 23,412 SNPs with wd above 50. In order to test if the genetic distance is robust when changing the type and the number of markers, we compared MRD between landraces estimated with different SNP datasets with that estimated with 17 SSR markers (Figure 5 and Supplementary Figures 5, 6). Missing allele frequencies within accession were replaced by corresponding average frequencies within the whole set of accessions before running this analysis. Allelic frequencies of two samples for replicated landraces were averaged before estimating MRD distance except for Pol3 for which one of two samples was removed (WG0109808-DNAH04).

Coefficient of determination between the distance matrices based on different subsets of SNP (MRDSNP) and 17 SSR markers (MRDSSR) was determined by using linear regression.

Data Availability Statement

The datasets as well as R scripts to predict allelic frequency in maize DNA bulk presented in this study can be found in online repositories (https://data.inrae.fr/) with the following doi: https://doi.org/10.15454/GANJ7J.

Author Contributions

SN, AC, and BG designed and supervised the study and selected the plant material. MA, SN, and AC drafted and corrected the manuscript. DM, VC, and AB extracted DNA and managed genotyping of landraces and inbred lines. CB, BG, and AC collected, maintained landraces, and inbred lines collection. SN, MA, AC, and TM-H developed the statistical methods and scripts for predicting allelic frequency from fluorescent data. MA, BG, and SN analyzed genetic diversity of landraces panel. All authors read and approved the manuscript.

Funding

This study was funded by l’Association pour l’Étude et l’Amélioration du mais (PROmais) in the project “Diverité Zea” and French National Research Agencies in project Investissement d’Avenir Amaizing (ANR-10-BTBR-01).

Conflict of Interest

The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.

Acknowledgments

We acknowledge greatly the French maize Biological Ressources Center, PROmais, and INRAE experimental units of St Martin de Hinx and Mauguio for collecting and maintaining Landraces and Inbred lines collection. We greatly acknowledge the colleagues who initially collected these landraces and André Gallais for having initiated these research programs. We also greatly acknowledge Pierre Dubreuil, Letizia Camus-Kulandaivelu, Cecile Rebourg, Céline Mir, and Domenica Maniccaci who conducted previous study on these landraces using DNA pooling approach with SSR and RFLP markers. The Infinium genotyping work was supported by CEA-CNG, by giving the INRAE-EPGV group access to its DNA and cell bank service for DNA quality control and to their Illumina genotyping platform. Thanks respectively to Anne Boland and Marie-Thérèse Bihoreau and their staff. We acknowledge the EPGV group, Dominique Brunel, Marie-Christine Le Paslier, and Aurélie Chauveau for the discussion and management of the Illumina genotyping.

Supplementary Material

The Supplementary Material for this article can be found online at: https://www.frontiersin.org/articles/10.3389/fpls.2020.568699/full#supplementary-material

Footnotes

  1. ^ http://www.panzea.org/

References

Abe, A., Kosugi, S., Yoshida, K., Natsume, S., Takagi, H., Kanzaki, H., et al. (2012). Genome sequencing reveals agronomically important loci in rice using MutMap. Nat. Biotech. 30, 174–178. doi: 10.1038/nbt.2095

PubMed Abstract | CrossRef Full Text | Google Scholar

Adoukonou-Sagbadja, H., Wagner, C., Dansi, A., Ahlemeyer, J., Daïnou, O., Akpagana, K., et al. (2007). Genetic diversity and population differentiation of traditional fonio millet (Digitaria spp.) landraces from different agro-ecological zones of West Africa. Theor. Appl. Genet. 115, 917–931.

Google Scholar

Aguirre-Liguori, J. A., Tenaillon, M. I., Vázquez-Lobo, A., Gaut, B. S., Jaramillo-Correa, J. P., Montes-Hernandez, S., et al. (2017). Connecting genomic patterns of local adaptation and niche suitability in teosintes. Mol. Ecol. 26, 4226–4240. doi: 10.1111/mec.14203

PubMed Abstract | CrossRef Full Text | Google Scholar

Arca, M., Gouesnard, B., Mary-Huard, T., Le Paslier, M.-C., Bauland, C., Combes, V., et al. (2020). Genome-wide SNP genotyping of DNA pools identifies untapped landraces and genomic regions that could enrich the maize breeding pool. BioRxiv doi: 10.1101/2020.09.30.321018

CrossRef Full Text | Google Scholar

Arteaga, M. C., Moreno-Letelier, A., Mastretta-Yanes, A., Vázquez-Lobo, A., Breña-Ochoa, A., Moreno-Estrada, A., et al. (2016). Genomic variation in recently collected maize landraces from Mexico. Genomics Data 7, 38–45. doi: 10.1016/j.gdata.2015.11.002

PubMed Abstract | CrossRef Full Text | Google Scholar

Backes, G., Hatz, B., Jahoor, A., and Fischbeck, G. (2003). RFLP diversity within and between major groups of barley in Europe. Plant Breed. 122, 291–299. doi: 10.1046/j.1439-0523.2003.00810.x

CrossRef Full Text | Google Scholar

Barcellos, L. F., Klitz, W., Field, L. L., Tobias, R., Bowcock, A. M., Wilson, R., et al. (1997). Association mapping of disease loci, by use of a pooled DNA genomic screen. Am. J. Hum. Genet. 61, 734–747. doi: 10.1086/515512

PubMed Abstract | CrossRef Full Text | Google Scholar

Baum, A. E., Akula, N., Cabanero, M., Cardona, I., Corona, W., Klemens, B., et al. (2007). A genome-wide association study implicates diacylglycerol kinase eta (DGKH) and several other genes in the etiology of bipolar disorder. Mol. Psychiatry 13, 197–207.

Google Scholar

Bhattacharjee, R., Bramel, P., Hash, C., Kolesnikova-Allen, M., and Khairwal, I. (2002). Assessment of genetic diversity within and between pearl millet landraces. Theor. Appl. Genet. 105, 666–673. doi: 10.1007/s00122-002-0917-1

PubMed Abstract | CrossRef Full Text | Google Scholar

Bouchet, S., Servin, B., Bertin, P., Madur, D., Combes, V., Dumas, F., et al. (2013). Adaptation of maize to temperate climates: mid-density genome-wide association genetics and diversity patterns reveal key genomic regions, with a major contribution of the Vgt2 (ZCN8) locus. PLoS One 8:e71377. doi: 10.1371/journal.pone.0071377

PubMed Abstract | CrossRef Full Text | Google Scholar

Brauner, P. C., Schipprack, W., Utz, H. F., Bauer, E., Mayer, M., Schön, C.-C., et al. (2019). Testcross performance of doubled haploid lines from European flint maize landraces is promising for broadening the genetic base of elite germplasm. Theor. Appl. Genet. 132, 1897–1908. doi: 10.1007/s00122-019-03325-0

PubMed Abstract | CrossRef Full Text | Google Scholar

Breen, G., Sham, P., Li, T., Shaw, D., Collier, D. A., and St. Clair, D. (1999). Accuracy and sensitivity of DNA pooling with microsatellite repeats using capillary electrophoresis. Mol. Cell. Probes 13, 359–365. doi: 10.1006/mcpr.1999.0259

PubMed Abstract | CrossRef Full Text | Google Scholar

Brohede, J., Dunne, R., McKay, J. D., and Hannan, G. N. (2005). PPC: an algorithm for accurate estimation of SNP allele frequencies in small equimolar pools of DNA using data from high density microarrays. Nucleic Acids Res. 33, e142. doi: 10.1093/nar/gni142

PubMed Abstract | CrossRef Full Text | Google Scholar

Camus-Kulandaivelu, L., Veyrieras, J.-B., Madur, D., Combes, V., Fourmann, M., Barraud, S., et al. (2006). Maize adaptation to temperate climate: relationship between population structure and polymorphism in the Dwarf8 Gene. Genetics 172, 2449–2463.

Google Scholar

Clark, A. G., Hubisz, M. J., Bustamante, C. D., Williamson, S. H., and Nielsen, R. (2005). Ascertainment bias in studies of human genome-wide polymorphism. Genome Res. 15, 1496–1502.

Google Scholar

Craig, D. W., Huentelman, M. J., Hu-Lince, D., Zismann, V. L., Kruer, M. C., Lee, A. M., et al. (2005). Identification of disease causing loci using an array-based genotyping approach on pooled DNA. BMC Genomics 6:138. doi: 10.1186/1471-2164-6-138

PubMed Abstract | CrossRef Full Text | Google Scholar

Daniels, J., Holmans, P., Williams, N., Turic, D., McGuffin, P., Plomin, R., et al. (1998). A simple method for analyzing microsatellite allele image patterns generated from DNA pools and its application to allelic association studies. Am. J. Hum. Genet. 62, 1189–1197.

Google Scholar

Dias, J. S., Lima, M. B., Song, K. M., Monteiro, A. A., Williams, P. H., and Osborn, T. C. (1991). Molecular taxonomy of Portuguese tronchuda cabbage and kale landraces using nuclear RFLPs. Euphytica 58, 221–229.

Google Scholar

Diaw, Y., Tollon-Cordet, C., Charcosset, A., Nicolas, S., Madur, D., Ronfort, J., et al. (2020). Genetic diversity of maize landraces from the South-West of France. BioRxiv doi: 10.1101/2020.08.17.253690

CrossRef Full Text | Google Scholar

Dubreuil, P., and Charcosset, A. (1998). Genetic diversity within and among maize populations: a comparison between isozyme and nuclear RFLP loci. Theor. Appl. Genet. 96, 577–587.

Google Scholar

Dubreuil, P., Rebourg, C., Merlino, M., and Charcosset, A. (1999). Evaluation of a DNA pooled-sampling strategy for estimating the RFLP diversity of maize populations. Plant Mol. Biol. Rep. 17, 123–138.

Google Scholar

Dubreuil, P., Warburton, M., Chastanet, M., Hoisington, D., and Charcosset, A. (2006). More on the introduction of temperate maize into Europe: large-scale bulk SSR genotyping and new historical elements. Maydica 51, 281–291.

Google Scholar

Elferink, M. G., Megens, H.-J., Vereijken, A., Hu, X., Crooijmans, R. P. M. A., and Groenen, M. A. M. (2012). Signatures of selection in the genomes of commercial and non-commercial chicken breeds. PLoS One 7:e32720. doi: 10.1371/journal.pone.0032720

PubMed Abstract | CrossRef Full Text | Google Scholar

Eschholz, T. W., Stamp, P., Peter, R., Leipner, J., and Hund, A. (2010). Genetic structure and history of Swiss maize (Zea mays L. ssp. mays) landraces. Genet. Resour. Crop Evol. 57, 71–84.

Google Scholar

Fernie, A. R., Tadmor, Y., and Zamir, D. (2006). Natural genetic variation for improving crop quality. Curr. Opin. Plant Biol. 9, 196–202. doi: 10.1016/j.pbi.2006.01.010

PubMed Abstract | CrossRef Full Text | Google Scholar

Ford-Lloyd, B. V., Newbury, H. J., Jackson, M. T., and Virk, P. S. (2001). Genetic basis for co-adaptive gene complexes in rice (Oryza sativa L.) landraces. Heredity 87, 530–536. doi: 10.1046/j.1365-2540.2001.00937.x

PubMed Abstract | CrossRef Full Text | Google Scholar

Frascaroli, E., Schrag, T. A., and Melchinger, A. E. (2013). Genetic diversity analysis of elite European maize (Zea mays L.) inbred lines using AFLP, SSR, and SNP markers reveals ascertainment bias for a subset of SNPs. Theor. Appl. Genet. 126, 133–141. doi: 10.1007/s00122-012-1968-6

PubMed Abstract | CrossRef Full Text | Google Scholar

Gallais, A., Moreau, L., and Charcosset, A. (2007). Detection of marker–QTL associations by studying change in marker frequencies with selection. Theor. Appl. Genet. 114, 669–681.

Google Scholar

Ganal, M. W., Durstewitz, G., Polley, A., Bérard, A., Buckler, E. S., Charcosset, A., et al. (2011). A large maize (Zea mays L.) SNP genotyping array: development and germplasm genotyping, and genetic mapping to compare with the B73 reference genome. PLoS One 6:e28334. doi: 10.1371/journal.pone.0028334

PubMed Abstract | CrossRef Full Text | Google Scholar

Gauthier, P., Gouesnard, B., Dallard, J., Redaelli, R., Rebourg, C., Charcosset, A., et al. (2002). RFLP diversity and relationships among traditional European maize populations. Theor. Appl. Genet. 105, 91–99.

Google Scholar

Gautier, M., Foucaud, J., Gharbi, K., Cézard, T., Galan, M., Loiseau, A., et al. (2013). Estimation of population allele frequencies from next-generation sequencing data: pool-versus individual-based genotyping. Mol. Ecol. 22, 3766–3779. doi: 10.1111/mec.12360

PubMed Abstract | CrossRef Full Text | Google Scholar

Glaubitz, J. C., Casstevens, T. M., Lu, F., Harriman, J., Elshire, R. J., Sun, Q., et al. (2014). TASSEL-GBS: a high capacity genotyping by sequencing analysis pipeline. PLoS One 9:e90346. doi: 10.1371/journal.pone.0090346

PubMed Abstract | CrossRef Full Text | Google Scholar

Gouda, A. C., Ndjiondjop, M. N., Djedatin, G. L., Warburton, M. L., Goungoulou, A., Kpeki, S. B., et al. (2020). Comparisons of sampling methods for assessing intra- and inter-accession genetic diversity in three rice species using genotyping by sequencing. Sci. Rep. 10:13995. doi: 10.1038/s41598-020-70842-0

PubMed Abstract | CrossRef Full Text | Google Scholar

Hagenblad, J., Zie, J., and Leino, M. W. (2012). Exploring the population genetics of genebank and historical landrace varieties. Genet. Resour. Crop Evol. 59, 1185–1199. doi: 10.1007/s10722-011-9754-x

CrossRef Full Text | Google Scholar

Hamblin, M. T., Warburton, M. L., and Buckler, E. S. (2007). Empirical comparison of simple sequence repeats and single nucleotide polymorphisms in assessment of maize diversity and relatedness. PLoS One 2:e1367. doi: 10.1371/journal.pone.0001367

PubMed Abstract | CrossRef Full Text | Google Scholar

Hoisington, D., Khairallah, M., Reeves, T., Ribaut, J.-M., Skovmand, B., Taba, S., et al. (1999). Plant genetic resources: what can they contribute toward increased crop productivity? Proc. Natl. Acad. Sci. U.S.A. 96, 5937–5943. doi: 10.1073/pnas.96.11.5937

PubMed Abstract | CrossRef Full Text | Google Scholar

Hölker, A. C., Mayer, M., Presterl, T., Bolduan, T., Bauer, E., Ordas, B., et al. (2019). European maize landraces made accessible for plant breeding and genome-based studies. Theor. Appl. Genet. 132, 3333–3345. doi: 10.1007/s00122-019-03428-8

PubMed Abstract | CrossRef Full Text | Google Scholar

Hoogendoorn, B., Norton, N., Kirov, G., Williams, N., Hamshere, M., Spurlock, G., et al. (2000). Cheap, accurate and rapid allele frequency estimation of single nucleotide polymorphisms by primer extension and DHPLC in DNA pools. Hum. Genet. 107, 488–493. doi: 10.1007/s004390000397

PubMed Abstract | CrossRef Full Text | Google Scholar

Inghelandt, D., Reif, J. C., Dhillon, B. S., Flament, P., and Melchinger, A. E. (2011). Extent and genome-wide distribution of linkage disequilibrium in commercial maize germplasm. Theor. Appl. Genet. 123, 11–20. doi: 10.1007/s00122-011-1562-3

PubMed Abstract | CrossRef Full Text | Google Scholar

Jawaid, A., and Sham, P. (2009). Impact and quantification of the sources of error in DNA pooling designs. Ann. Hum. Genet. 73, 118–124. doi: 10.1111/j.1469-1809.2008.00486.x

PubMed Abstract | CrossRef Full Text | Google Scholar

Johnston, S. E., Lindqvist, M., Niemelä, E., Orell, P., Erkinaro, J., Kent, M. P., et al. (2013). Fish scales and SNP chips: SNP genotyping and allele frequency estimation in individual and pooled DNA from historical samples of Atlantic salmon (Salmo salar). BMC Genomics 14:439. doi: 10.1186/1471-2164-14-439

PubMed Abstract | CrossRef Full Text | Google Scholar

Kilian, B., and Graner, A. (2012). NGS technologies for analyzing germplasm diversity in genebanks. Brief. Funct. Genomics 11, 38–50. doi: 10.1093/bfgp/elr046

PubMed Abstract | CrossRef Full Text | Google Scholar

Kirov, G., Nikolov, I., Georgieva, L., Moskvina, V., Owen, M. J., and O’Donovan, M. C. (2006). Pooled DNA genotyping on affymetrix SNP genotyping arrays. BMC Genomics 7:27. doi: 10.1186/1471-2164-7-27

PubMed Abstract | CrossRef Full Text | Google Scholar

Lam, H.-M., Xu, X., Liu, X., Chen, W., Yang, G., Wong, F.-L., et al. (2010). Resequencing of 31 wild and cultivated soybean genomes identifies patterns of genetic diversity and selection. Nat. Genet. 42, 1053–1059. doi: 10.1038/ng.715

PubMed Abstract | CrossRef Full Text | Google Scholar

Laval, G., SanCristobal, M., and Chevalet, C. (2002). Measuring genetic distances between breeds: use of some distances in various short term evolution models. Genet. Sel. Evol. 34, 481–507. doi: 10.1051/gse:2002019

CrossRef Full Text | Google Scholar

Le Hellard, S., Ballereau, S. J., Visscher, P. M., Torrance, H. S., Pinson, J., Morris, S. W., et al. (2002). SNP genotyping on pooled DNAs: comparison of genotyping technologies and a semi automated method for data storage and analysis. Nucleic Acids Res. 30:e74.

Google Scholar

LeDuc, C., Miller, P., Lichter, J., and Parry, P. (1995). Batched analysis of genotypes. Genome Res. 4, 331–336.

Google Scholar

Lipkin, E., Mosig, M. O., Darvasi, A., Ezra, E., Shalom, A., Friedmann, A., et al. (1998). Quantitative trait locus mapping in dairy cattle by means of selective milk DNA pooling using dinucleotide microsatellite markers: analysis of milk protein percentage. Genetics 149, 1557–1567.

Google Scholar

Liu, K., Goodman, M., Muse, S., Smith, J. S., Buckler, E., and Doebley, J. (2003). Genetic structure and diversity among maize inbred lines as inferred from DNA microsatellites. Genetics 165, 2117–2117.

Google Scholar

Mascher, M., Schreiber, M., Scholz, U., Graner, A., Reif, J. C., and Stein, N. (2019). Genebank genomics bridges the gap between the conservation of crop diversity and plant breeding. Nat. Genet. 51, 1076–1081. doi: 10.1038/s41588-019-0443-6

PubMed Abstract | CrossRef Full Text | Google Scholar

Mazzeo, R., Morgese, A., Sonnante, G., Zuluaga, D. L., Pavan, S., Ricciardi, L., et al. (2019). Genetic Diversity in broccoli rabe (Brassica rapa L. subsp. sylvestris (L.) Janch.) from Southern Italy. Sci. Hortic. 253, 140–146. doi: 10.1016/j.scienta.2019.03.061

CrossRef Full Text | Google Scholar

McCouch, S. R., McNally, K. L., Wang, W., and Sackville Hamilton, R. (2012). Genomics of gene banks: a case study in rice. Am. J. Bot. 99, 407–423. doi: 10.3732/ajb.1100385

PubMed Abstract | CrossRef Full Text | Google Scholar

McCouch, S. R., Zhao, K., Wright, M., Tung, C.-W., Ebana, K., Thomson, M., et al. (2010). Development of genome-wide SNP assays for rice. Breed. Sci. 60, 524–535. doi: 10.1270/jsbbs.60.524

PubMed Abstract | CrossRef Full Text | Google Scholar

Mir, C., Zerjal, T., Combes, V., Dumas, F., Madur, D., Bedoya, C., et al. (2013). Out of America: tracing the genetic footprints of the global diffusion of maize. Theor. Appl. Genet. 126, 2671–2682. doi: 10.1007/s00122-013-2164-z

PubMed Abstract | CrossRef Full Text | Google Scholar

Moragues, M., Comadran, J., Waugh, R., Milne, I., Flavell, A. J., and Russell, J. R. (2010). Effects of ascertainment bias and marker number on estimations of barley diversity from high-throughput SNP genotype data. Theor. Appl. Genet. 120, 1525–1534. doi: 10.1007/s00122-010-1273-1

PubMed Abstract | CrossRef Full Text | Google Scholar

Nielsen, R. (2004). Population genetic analysis of ascertained SNP data. Hum. Genomics 1, 218–224.

Google Scholar

Ozerov, M., Vasemägi, A., Wennevik, V., Diaz-Fernandez, R., Kent, M., Gilbey, J., et al. (2013). Finding markers that make a difference: DNA pooling and SNP-arrays identify population informative markers for genetic stock identification. PLoS One 8:e82434. doi: 10.1371/journal.pone.0082434

PubMed Abstract | CrossRef Full Text | Google Scholar

Parzies, H. K., Spoor, W., and Ennos, R. A. (2000). Genetic diversity of barley landrace accessions (Hordeum vulgare ssp. vulgare) conserved for different lengths of time in ex situ gene banks. Heredity 84, 476–486. doi: 10.1046/j.1365-2540.2000.00705.x

PubMed Abstract | CrossRef Full Text | Google Scholar

Peiris, B. L., Ralph, J., Lamont, S. J., and Dekkers, J. C. M. (2011). Predicting allele frequencies in DNA pools using high density SNP genotyping data. Anim. Genet. 42, 113–116. doi: 10.1111/j.1365-2052.2010.02077.x

PubMed Abstract | CrossRef Full Text | Google Scholar

Perlin, M. W., Lancia, G., and Ng, S.-K. (1995). Toward fully automated genotyping: genotyping microsatellite markers by deconvolution. Am. J. Hum. Genet. 57:1199.

Google Scholar

Pervaiz, Z. H., Rabbani, M. A., Khaliq, I., Pearce, S. R., and Malik, S. A. (2010). Genetic diversity associated with agronomic traits using microsatellite markers in Pakistani rice landraces. Electron. J. Biotechnol. 13, 4–5.

Google Scholar

Pupilli, F., Labombarda, P., Scotti, C., and Arcioni, S. (2000). RFLP analysis allows for the identification of alfalfa ecotypes. Plant Breed. 119, 271–276. doi: 10.1046/j.1439-0523.2000.00478.x

CrossRef Full Text | Google Scholar

Rafalski, A. (2002). Applications of single nucleotide polymorphisms in crop genetics. Curr. Opin. Plant Biol. 5, 94–100.

Google Scholar

Rebourg, C., Chastanet, M., Gouesnard, B., Welcker, C., Dubreuil, P., and Charcosset, A. (2003). Maize introduction into Europe: the history reviewed in the light of molecular data. Theor. Appl. Genet. 106, 895–903.

Google Scholar

Rebourg, C., Dubreuil, P., and Charcosset, A. (1999). Genetic diversity among maize populations: bulk RFLP analysis of 65 accessions. Maydica 44, 237–249.

Google Scholar

Rebourg, C., Gouesnard, B., and Charcosset, A. (2001). Large scale molecular analysis of traditional European maize populations. Relationships with morphological variation. Heredity 86, 574–587.

Google Scholar

Reif, J. C., Hamrit, S., Heckenberger, M., Schipprack, W., Peter Maurer, H., Bohn, M., et al. (2005a). Genetic structure and diversity of European flint maize populations determined with SSR analyses of individuals and bulks. Theor. Appl. Genet. 111, 906–913. doi: 10.1007/s00122-005-0016-1

PubMed Abstract | CrossRef Full Text | Google Scholar

Reif, J. C., Zhang, P., Dreisigacker, S., Warburton, M. L., van Ginkel, M., Hoisington, D., et al. (2005b). Wheat genetic diversity trends during domestication and breeding. Theor. Appl. Genet. 110, 859–864.

Google Scholar

Reif, J. C., Warburton, M. L., Xia, X. C., Hoisington, D. A., Crossa, J., Taba, S., et al. (2006). Grouping of accessions of Mexican races of maize revisited with SSR markers. Theor. Appl. Genet. 113, 177–185. doi: 10.1007/s00122-006-0283-5

PubMed Abstract | CrossRef Full Text | Google Scholar

Reyes-Valdés, M. H., Santacruz-Varela, A., Martínez, O., Simpson, J., Hayano-Kanashiro, C., and Cortés-Romero, C. (2013). Analysis and optimization of Bulk DNA sampling with binary scoring for germplasm characterization. PLoS One 8:e79936. doi: 10.1371/journal.pone.0079936

PubMed Abstract | CrossRef Full Text | Google Scholar

Rincent, R., Moreau, L., Monod, H., Kuhn, E., Melchinger, A. E., Malvar, R. A., et al. (2014). Recovering power in association mapping panels with variable levels of linkage disequilibrium. Genetics 197, 375–387. doi: 10.1534/genetics.113.159731

PubMed Abstract | CrossRef Full Text | Google Scholar

Rode, N. O., Holtz, Y., Loridon, K., Santoni, S., Ronfort, J., and Gay, L. (2018). How to optimize the precision of allele and haplotype frequency estimates using pooled-sequencing data. Mol. Ecol. Resour. 18, 194–203. doi: 10.1111/1755-0998.12723

PubMed Abstract | CrossRef Full Text | Google Scholar

Rogers, J. S. (1972). Measures of genetic similarity and genetic distance. Stud. Genet. 7, 145–153.

Google Scholar

Rousselle, Y., Jones, E., Charcosset, A., Moreau, P., Robbins, K., Stich, B., et al. (2015). Study on essential derivation in maize: III. Selection and evaluation of a panel of single nucleotide polymorphism loci for use in European and North American Germplasm. Crop Sci. 55:1170. doi: 10.2135/cropsci2014.09.0627

CrossRef Full Text | Google Scholar

Schlötterer, C., Tobler, R., Kofler, R., and Nolte, V. (2014). Sequencing pools of individuals — mining genome-wide polymorphism data without big funding. Nat. Rev. Genet. 15, 749–763. doi: 10.1038/nrg3803

PubMed Abstract | CrossRef Full Text | Google Scholar

Segovia-Lerma, A., Cantrell, R. G., Conway, J. M., and Ray, I. M. (2003). AFLP-based assessment of genetic diversity among nine alfalfa germplasms using bulk DNA templates. Genome 46, 51–58.

Google Scholar

Sham, P., Bader, J. S., Craig, I., O’Donovan, M., and Owen, M. (2002). DNA Pooling: a tool for large-scale association studies. Nat. Rev. Genet. 3, 862–871. doi: 10.1038/nrg930

PubMed Abstract | CrossRef Full Text | Google Scholar

Simpson, C. L. (2005). A central resource for accurate allele frequency estimation from pooled DNA genotyped on DNA microarrays. Nucleic Acids Res. 33, e25. doi: 10.1093/nar/gni028

PubMed Abstract | CrossRef Full Text | Google Scholar

Strigens, A., Schipprack, W., Reif, J. C., and Melchinger, A. E. (2013). Unlocking the genetic diversity of maize landraces with doubled haploids opens new avenues for breeding. PLoS One 8:e57234. doi: 10.1371/journal.pone.0057234

PubMed Abstract | CrossRef Full Text | Google Scholar

Tanksley, S. D. (1997). Seed banks and molecular maps: unlocking genetic potential from the wild. Science 277, 1063–1066. doi: 10.1126/science.277.5329.1063

PubMed Abstract | CrossRef Full Text | Google Scholar

Teumer, A., Ernst, F. D., Wiechert, A., Uhr, K., Nauck, M., Petersmann, A., et al. (2013). Comparison of genotyping using pooled DNA samples (allelotyping) and individual genotyping using the affymetrix genome-wide human SNP array 6.0. BMC Genomics 14:506. doi: 10.1186/1471-2164-14-506

PubMed Abstract | CrossRef Full Text | Google Scholar

Unterseer, S., Bauer, E., Haberer, G., Seidel, M., Knaak, C., Ouzunova, M., et al. (2014). A powerful tool for genome analysis in maize: development and evaluation of the high density 600 k SNP genotyping array. BMC Genomics 15, 823. doi: 10.1186/1471-2164-15-823

PubMed Abstract | CrossRef Full Text | Google Scholar

van Heerwaarden, J., Doebley, J., Briggs, W. H., Glaubitz, J. C., Goodman, M. M., de Jesus Sanchez, et al. (2011). Genetic signals of origin, spread, and introgression in a large sample of maize landraces. Proc. Natl. Acad. Sci. U.S.A. 108, 1088–1092. doi: 10.1073/pnas.1013011108

PubMed Abstract | CrossRef Full Text | Google Scholar

Vigouroux, Y., Mitchell, S., Matsuoka, Y., Hamblin, M., Kresovich, S., Smith, J. S. C., et al. (2005). An analysis of genetic diversity across the maize genome using microsatellites. Genetics 169, 1617–1630.

Google Scholar

Yang, X., Xu, Y., Shah, T., Li, H., Han, Z., Li, J., et al. (2011). Comparison of SSRs and SNPs in assessment of genetic relatedness in maize. Genetica 139, 1045–1054. doi: 10.1007/s10709-011-9606-9

PubMed Abstract | CrossRef Full Text | Google Scholar

Yao, Q., Yang, K., Pan, G., and Rong, T. (2007). Genetic diversity of maize (Zea mays L.) landraces from Southwest China based on SSR data. J. Genet. Genomics 34, 851–860.

Google Scholar

Zhao, W., Canaran, P., Jurkuta, R., Fulton, T., Glaubitz, J., Buckler, E., et al. (2006). Panzea: a database and resource for molecular and functional diversity in the maize genome. Nucleic Acids Res. 34, D752–D757.

Google Scholar

Keywords: genebank, DNA pooling, Zea mays L., allelotyping, landraces, genetic diversity, SNP array, open-pollinated varieties

Citation: Arca M, Mary-Huard T, Gouesnard B, Bérard A, Bauland C, Combes V, Madur D, Charcosset A and Nicolas SD (2021) Deciphering the Genetic Diversity of Landraces With High-Throughput SNP Genotyping of DNA Bulks: Methodology and Application to the Maize 50k Array. Front. Plant Sci. 11:568699. doi: 10.3389/fpls.2020.568699

Received: 01 June 2020; Accepted: 12 November 2020;
Published: 07 January 2021.

Edited by:

Roberto Papa, Marche Polytechnic University, Italy

Reviewed by:

Concetta Lotti, University of Foggia, Italy
Elisabetta Frascaroli, University of Bologna, Italy

Copyright © 2021 Arca, Mary-Huard, Gouesnard, Bérard, Bauland, Combes, Madur, Charcosset and Nicolas. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Stéphane D. Nicolas, stephane.nicolas@inrae.fr

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.