ORIGINAL RESEARCH article
Front. Plant Sci.
Sec. Plant Biophysics and Modeling
This article is part of the Research TopicExploring Plant Stress Responses Using Non-Invasive Light TechniquesView all 6 articles
Synergistic Effects of Titanium dioxide Nanoparticles and Microplastics on Lentil Seeds by a Non-invasive Biospeckle Optical Coherence Tomography (bOCT)
Provisionally accepted- 1Saitama Daigaku, Saitama, Japan
- 2Saitama Daigaku Daigakuin Rikogaku Kenkyuka, Saitama, Japan
- 3Innovative Global Program, Faculty of Engineering, Shibaura Institute of Technology, Minato, Japan
Select one of your emails
You have multiple emails registered with Frontiers:
Notify me on publication
Please enter your email address:
If you already have an account, please login
You don't have a Frontiers account ? You can register here
Titanium dioxide nanoparticles (TiO2 NPs) are used in agriculture, cosmetics, energy, and environmental applications, necessitating advanced methods to evaluate their effects on biological systems such as plant growth. This study demonstrates the use of biospeckle optical coherence tomography (bOCT), a novel and non-invasive technique, to rapidly assess the size and concentration-dependent impacts of TiO2 NPs as well as the synergistic effects of TiO₂ NPs and polyethylene microplastics (PEMPs) on lentil (Lens culinaris) seeds. The primary objective was to validate bOCT as a rapid and non-invasive tool for assessing NPs-induced biological responses in plants. Seeds were treated with TiO2 particles (<5 µm, <100 nm, 21 nm) at concentrations of 0, 25, 100, and 200 mg/L. The sizes were selected based on commercially available TiO₂ NPs grades in industrial and agricultural applications. For synergy experiments, TiO₂ NPs (21 nm) at 25 and 100 mg/L were combined with PEMPs (744–4990 nm) at concentration-based ratios of 1:1 and 1:2. A swept-source OCT system (central wavelength: 1.3 µm; bandwidth: 125 nm; sweep frequency: 20 kHz), acquired OCT structural images at 12.5 frames per second and biospeckle images were calculated as the ratio of the standard deviation to the mean of 100 OCT structural images over an 8-second interval, at 0, 5, 10, and 20 hours (h) post-exposure. Smaller TiO₂ NPs (<100 nm) enhanced internal activity at lower concentrations (25 mg/L), while larger particles (<5 µm) exhibited similar effects at higher concentrations (200 mg/L). These observations were qualitatively consistent with conventional physiological measurements, including germination rates, growth parameters, and antioxidative enzyme activities recorded over 7 days. The co-application of TiO₂ NPs and PEMPs at a 1:1 ratio alleviated the reduction in internal activity caused by PEMPs alone, while the 1:2 ratio led to a significant decrease in biospeckle contrast, indicating suppressed internal seed activity. bOCT successfully detected early biological responses of TiO₂ NPs within 20 h, demonstrating its efficiency compared to the conventional methods. The ability of bOCT to monitor dynamic internal changes highlights its potential as a rapid tool for assessing NPs as well as their synergistic effects with polyethylene microplastics on plants.
Keywords: Dynamic optical coherence tomography, Nanotoxicity, Plant stress response, seed germination, speckle
Received: 03 Oct 2025; Accepted: 04 Feb 2026.
Copyright: © 2026 Tyagi, Kadono and Rajagopalan. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) or licensor are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
* Correspondence:
Hirofumi Kadono
Uma Maheswari Rajagopalan
Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
